Advertisement
Ezlo Atom Advanced Information
Interoperability statement:
™
™
This product can be operated in any Z-Wave
network with other Z-Wave
certified devices
from other manufacturers. All mains operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
Location of the Security 2 DSK on the Product
The DSK can be found at the back of the product and also in the box.
DSK is not accessible from the UI
Location in the Manual describing Where to Find the Security 2
DSK on the Product
Ths quick start guide describes how to set up the controller however doesn't describe how to
locate the DSK.
Advertisement
Table of Contents
Related Manuals for eZLO Atom
Summary of Contents for eZLO Atom
- Page 1 Ezlo Atom Advanced Information Interoperability statement: ™ ™ This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
- Page 2 Product Classic Inclusion Description An Online Guide can be found here: https://support.getvera.com/hc/en-us/articles/360035597854-Ezlo-Atom-Guide-How-to-Pair-and- Unpair-a-Device Open the mobile app, click on the three line icon in the top right corner to open the side menu and select Devices. Then, hit on the button Add Device...
- Page 3 Look for the device you want to pair so it can show you the pairing steps for the device. The Hub is on pairing mode as it shows the message at the top : Add new devices now…...
- Page 4 Follow the inclusion steps to pair the device. Once paired, a confirmation message will appear and the user will be able to name the device and add it to a room.
- Page 5 Product Exclusion Description An Online Guide can be found here: https://support.getvera.com/hc/en-us/articles/360035597854-Ezlo-Atom-Guide-How-to-Pair-and- The unit can be taken to exclusion by going to the device which is going to be excluded Then click on the delete icon. Select the unpair option so the Hub goes into exclusion mode, it allows to see a message which...
- Page 6 Follow the steps on the device to unpair it, after this process, the device is gone from the system and hub.
- Page 7 4. Once the connection is established, in API Call section select hub.extensions.plugin.run 5. Select HUB:zwave/scripts/start_learn Initiate Controller Replication Follow Device inclusion procedure. Atom will detect that controller is being included and Controller Replication will be started. Product Factory Reset 1. Wi-Fi Reset: Set network settings to factory defaults. With the gateway still plugged into the USB port, press the reset button twice within a lapse of less than 2 seconds - The status LED will blink twice per second as confirmation.
Need help?
Do you have a question about the Atom and is the answer not in the manual?
Questions and answers