simplehuman Under counter pull-out can Quick Start Manual page 2

contents
one-piece welded bucket support frame
track
eight screws
warranty
Your simplehuman under counter pull-out can is backed by the added
®
security of a 5-year warranty. For the duration of the warranty,
simplehuman will repair or replace any defective item free of charge.
®
Please visit www.simplehuman.com/service to register and for full terms
and restrictions.
120-0003-01
one polypropylene
bucket
how to install
IMPORTANT: DO NOT INSERT THE BUCKET FRAME INTO THE ONE-PIECE
WELDED TRACK UNTIL THE LAST STEP
1.
Locate area in cabinet for the one-piece
welded track.
NOTE: The track must be located at least 2
inches behind edge of cabinet opening. Do NOT
line up the track to the edge of the door, or else
2" the frame's handle will prevent the door from
IMPORTANT
closing all the way.
2.
Hold track in place and fasten the screws.
3.
Gently insert the bucket frame into the
one-piece welded track. (Be sure the curved
handle is facing frontward.)
4.
Insert the polypropylene bucket into the
bucket support frame.
www. .com