Siemens SIMATIC S7 Configuration And Programming Manual page 5

Hide thumbs Also See for SIMATIC S7:

Table of Contents

Calculation of Maximum Response Time of Your F-System

Use the Microsoft Excel file provided with S7 Distributed Safety, V 5.2 + Service

Pack 1 (SP 1) to calculate the maximum response time of your F-system.

Note

When you install S7 Distributed Safety, V 5.2 + SP 1, the Excel file for V 5.1 or. V

5.2 (...\Siemens\STEP7\S7Manual\s7fco\s7fcotib.xls) supplied with the optional

package is overwritten. If you made your response time calculations directly in this

file rather than in a copy of the file that you created in a different folder, save the

V 5.1 or V 5.2 file in another folder before installing S7 Distributed Safety,

V 5.2 + SP 1.

Otherwise your calculations in V 5.1 or V 5.2 will be lost when you install S7

Distributed Safety, V 5.2 + SP 1!

If you want to update the calculations for S7 Distributed Safety, V 5.2 + SP 1,

transfer these entries manually to the V 5.2 + SP 1 file.

Product Information for the S7 Distributed Safety, Configuring and Programming Manual

A5E00169432-02

Table of Contents