TE-Group DreamLED User Manual

PACKAGE CONTENTS
The DreamLED Desk Sensor LED lamp packaging includes:
* Desk Sensor LED lamp
* Power cable + Power adapter
* Manual
FEATURES
• Type of LED: 2835 HP • Power supply: 100-240V AC-DC 12V/2A
• Desk lamp LED: 48 pcs HP SMD • Instant start
• Max. wattage: 15W (depends on mode) • Operating temp.: -10 ~ +40 degrees
• Color temperature: 2000~6500K • Material: ABS + PS + Rubber
• Lifetime: > 35000 hours • Color: Opal UV Black paint
• Lumen: max. 960 Lm • Weight: 1261 Grams
• Color rendering index: > 80 Ra
INSTALLATION
See illustration 1
• Remove the attachment nut from the light stand.
• Insert the light stand into the hole on the base.
• Screw the attachment nut back to the light stand at the bottom of the base, and tighten.
• Connect the power adapter to the power input at the back of the lamp.
• Plug the power adapter into an outlet with an input voltage of 110V-240V AC.
USB POWER PORT
See illustration 2
The built-in 2.0A @ 10W USB charging port can supply 5V power to charge all USB
compatible mobile devices, like f.e. smartphones and tablets from any brand.
Note: We recommend using the original charging cable of your device (supplied by the
manufacturer) for optimal charging.
OPERATION
See illustration 3
1. 5-level brightness dimmer: There are 5 levels of brightness within each lighting mode.
Use the up and down buttons to change the brightness.
2. Reading mode (4500-5500K): Mid-range color temperature. Stimulates concentration
& reduces eye strain. Ideal for office work & reading.
3. Study mode (5500-6500K): High-range color temperature. Increases attention & con-
centration. Ideal for research & studying.
4. Relax mode (3500-4500K): Low-range color temperature. Promotes relaxation. Ideal
for creative activities.
5. Sleep mode (2000-3500K): Encourages a deep sleep with comfortable soft light. Ideal
for bedtime preparations.
6. Power ON/OFF: Press once to turn the lamp ON/OFF.
7. Auto Off Timer: Press once to activate the timer. The ON/OFF LED indicator will start
blinking. The lamp will now turn off automatically after 1 hour.
ERGONOMIC DESIGN
See illustration 4
The lamp is foldable, adjustable and rotatable to create different light angles and positions.
Note:
• When adjusting the position of the arm, always hold the lamp base.
• Excessive adjustment may cause damage!
SAFETY INSTRUCTIONS
• Never open the Desk Sensor LED Lamp.
• Never touch the plug contacts with sharp or metal objects.
• Make sure that cables cannot cause a trip hazard.
• Use only the original power supply and original accessories.
• Never place the device in the vicinity of heat sources.
• Never place the unit on surfaces that are heat sensitive.
• Protect the device from special liquids and vapors.
• Unplug the unit at the main power socket before cleaning. Do not use any solvent
based cleaning agents, only a soft, dry anti-static cloth.
• Do not attempt repairs yourself.
• If the unit is not properly installed or operated DreamLED® cannot accept liability.
SUPPORT
For more information, technical questions and return requests concerning this product,
you should contact: support@dream-led.eu.
GUARANTEE
Copyright © DreamLED®. DreamLED® is a registered trademark of TE-Group NV. The
DreamLED® brand stands for superior product quality and outstanding customer
service. That is why DreamLED® warrants this product against all defects in material
and workmanship for a period of two (2) years from the date of original purchase of the
product. The terms of this guarantee and the extent of responsibility of DreamLED under
this warranty can be downloaded from the website: www.dream-led.eu.
GB ILLUSTRATIONS
ILLUSTRATION I
ILLUSTRATION II
USB
CHARGING
PORT
ILLUSTRATION IV
40cm
DECLARATION OF CONFORMITY
,
Hereby
DreamLED Desk Sensor LED Lamp
Dimmable Desk Sensor Touch LED Lamp
The above mentioned product complies with the essential requirements, which
are specified in the directive 2014/30/EU on the approximation of the laws on the
Member States relating to electromagnetic compatibility.
This product has been tested against following standards and specifications,
applying versions valid on April 2015:
EN55015:2013
EN61547:2009
EN61000-3-2:2014
EN61000-3-3:2013
Joseph Van Oosterum, CEO TE-Group NV
------------ Manual/DreamLED Desk Sensor LED Lamp/04-15/V01 -------------
Copyright © DreamLED
ILLUSTRATION III
1
2
3
4
5
6
7
®
User's Manual
NL FR
GB
DESK SENSOR LED LAMP
D IT