INDEX Introduction to Therapy Care C………………………..…………………………………………………………..02 First steps ………………..………………………………..…………………………………………………………..…….03 • Equipment installation ……………………….………………………………………………………..03 Use of Equipment …….………………………………………………………………………………………………….04 • Start up …………….………………………………………………………………………………………….04 • Temperature and time selection………..…………………………………………………………04 • Compression level selection………...……………………………………………………………...04 • Start Treatment ….………………………………………………………………………………………..04 • Cancel treatment……………..…………………………………………………………………………..04 Data on the screen (Performing treatment)……………………………..……………………………….05...
Touch screen of sequential hydraulic compressions. Therapy Care C is not a medical device. The use of the equipment, to carry out physiotherapy or rehabilitation treatments, will always be carried out under the supervision of qualified medical personnel.
(Whenever the equipment is going to be FIRST STEPS transported, the tanks must be emptied, see the section on: Refilling and EQUIPMENT INSTALLATION emptying the tank). • Use only the fluid provided by the 1.- Install the equipment in a suitable manufacturer, the use of any other place: fluid could damage the equipment and...
Start up 1.- Press the power switch. 6.1.- Disabling the beep of the "Equipment 2.- Click on the text "Therapy Care C" to ready": start preparing temperatures. If you want to deactivate / activate the beep that indicates that the equipment is...
9.- Confirmation to cancel treatment: Once the "Cancel treatment" key is pressed, the "Confirmation" screen appears in which if you press the key you cancel the treatment and if you press the key you return to the treatment. Data that appears on the screen Performing treatment During the treatment, on the screen you can see the data of:...
Refilling and emptying the tank: Data that appears on the screen • Refilling and emptying the tank: To access the tank screen, press the "tank" key, located at the top right of the screen. • Once you access the tank screen you can: •...
• Regulation of active hydraulic compression levels: Levels 0,1,2 and 3 • Level 0 without compression. • Levels 1,2 and 3: different levels of compression. Manufacturer : ARB Systems Proyectos Electrónicos S.L. - CIF. B 84931070 Brand : ARB - Model : Therapy Care C...
RESOLUTION OF PROBLEMS Low fluid level alarm / indication: • Use only the fluid provided by the manufacturer, the use of any other fluid could damage the equipment and void the warranty. • If at any time the equipment shows us the screen of "insufficient liquid / tank fill", we must proceed to fill the tank.
• If the problem persists or repeats, notify the technical service. Therapy Care C is not a medical device, so the use of the equipment for physiotherapy, rehabilitation,… treatments will always be carried out under the supervision of qualified personnel.
In any of the following cases it is necessary to request authorization from your doctor: • Oncological pathology or carrier of a chronic disease in terminal stage. • Serious circulatory disorders, central or peripheral, the latter with some nuances if the temperature is properly regulated.
The equipment can only be repaired by the Official Technical Service. The user must not attempt to repair any malfunction by himself. Manufacturer and technical service: ARB Systems Proyectos Electrónicos SL C/ Pico de la Sierrona, 135 28400 Collado Villalba Madrid Tlf.
Need help?
Do you have a question about the Therapy Care C and is the answer not in the manual?
Questions and answers