Advertisement
Quick Links
Doc No.: OSD-2018-01A
Rev.: V2.0
Issue Date: 2018-05-04
Instruction for Use
Power wheelchair
【Product Name】Power wheelchair
【Model】A06
【Performance parameter】
Weight：≤30kg
Maximum load：120kg
Maximum forward speed：≤6km/h
The braking distance of Horizontal Road surface：1.0m
Minimum turning radius：≤1200mm
Static stability：Up9°，Down9°，Side9°
Dynamic stability： 6°
Obstacle height：50mm
Tire specification： Front200X50/PU Solid tire；Rear12-1/2"x 2-1/4"/Rubber
Pneumatic Tyre
Motor parameters: DC24V，Rated power 250WX2
Battery parameter：DC24V10AH Lithium battery
Controller parameter：LED Charge indication, Stepless speed regulation,
Maximum output current 40Ａ
Charger parameters：Input AC100-240V,50-60Hz,3A, Output DC24V，3A
【Intended Use】The Power Wheelchair is a chair equipped with wheels, it is a
means of transportation for the disabled, the sick, and the infirm.
【Appearance and Components】It is mainly composed of a frame, wheel, seat
rest, armrest, battery, motor, and controller.
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Rehabmart A06
- Page 1 Doc No.: OSD-2018-01A Rev.: V2.0 Issue Date: 2018-05-04 Instruction for Use Power wheelchair 【Product Name】Power wheelchair 【Model】A06 【Performance parameter】 Weight：≤30kg Maximum load：120kg Maximum forward speed：≤6km/h The braking distance of Horizontal Road surface：1.0m Minimum turning radius：≤1200mm Static stability：Up9°，Down9°，Side9° Dynamic stability： 6°...
- Page 2 Armrest Frame Controller Seacrest Motor Rear-wheel Footrest Battery Caster wheel 【Indications】To be used for the disabled, the sick, and the old and infirm who have difficulty in moving. 【Usage】 4.1Wheelchair unfolding and folding method 4.1.1 Wheelchair unfolding: Hold the backrest with one hand, and press and hold the seat cushion with the other hand to push it away, as shown in Figure.
- Page 3 Figure. 3 Figure. 4 4.2 Installation and Adjustment of Joystick Take joystick out of the bag, and , as shown lock and fix it in the armrest tube with M6 knob in Figure. 7, then connect the plug with one end of the connecting wire and tighten it, as shown in Figure.
- Page 4 Figure 11 Armrest Flip Function Turn the armrest locking knob upward, as shown in Figure. 12, and then lift the armrest upward, as shown in Figure. 13. To fix the armrest, press the armrest downward and turn the knob downward, as shown in Figure. 14. Figure 12 Figure 13 Figure 14...
- Page 5 4.7 Use of Seat Belt Press the red button on the safety belt with your hand to open the safety belt, as shown in Figure. 17. Adjust the appropriate length of the safety belt after seating in the wheelchair, and buckle the safety belt, as shown in Figure. 18. Figure.
- Page 6 Joystick knob Speed increase button Horn Speed Lever Indicator Power Indicator Power switch Speed decrease button Figure 21 4.8.3 After the user is seated firmly, turn on the power switch and push the joystick knob forward to speed up slowly. If you want to stop, put down joystick knob in your hand and stop.
- Page 7 on, and the power indicator lights flash one by one to indicate that wheelchairs cannot be used during charging, as shown in Figure 25. Figure. 24 Figure. 25 4.11 Power Indication 4.12.1 As shown in Figure. 21, the power indicator lights are all on to indicate full power.
- Page 8 Figure. 28 Figure. 29 4.13.4 When taking public transportation (such as planes, high-speed trains, public buses, etc.), all the batteries on the vehicle should be taken out. As shown in Figure. 28, the wheelchair should be folded and packed for shipment, while the batteries should be carried with you.
- Page 9 Below cable, information is provided for EMC reference. Max. cable length, Cable Cable Number Shielded/unshielded classification AC Power Line 1.5m Unshielded 1 Set AC Power DC Power Line 1.5m Unshielded 1 Set DC Power Important information regarding Electro Magnetic Compatibility (EMC) This electrical medical equipment needs special precautions regarding EMC and put into service according to the EMC information provided in the user manual;...
- Page 10 a) An exemption has been used and that the equipment has not been tested for radiated RF immunity over the entire frequency range 80 MHz to 6 000 MHz; b) WARNING: This equipment has been tested for radiated RF immunity only at selected frequencies, and use nearby of emitters at other frequencies could result in improper operation";...
- Page 11 Phenomenon Compliance Electromagnetic environment CISPR 11 RF emissions Home healthcare environment Group 1, Class B Harmonic IEC 61000-3-2 Home healthcare environment distortion Class A Voltage IEC 61000-3-3 fluctuations and Home healthcare environment Compliance flicker EMS Compliance Table (Table 2-5) Table 2 - Enclosure Port Immunity test levels Basic EMC Phenomenon...
- Page 12 Test frequency Band Immunity test levels (MHz) (MHz) Home healthcare environment 380-390 Pulse modulation 18Hz, 27V/m 430-470 FM, ±5kHz deviation, 1kHz sine, 28V/m 704-787 Pulse modulation 217Hz, 9V/m 800-960 Pulse modulation 18Hz, 28V/m 1720 1845 1700-1990 Pulse modulation 217Hz, 28V/m 1970 2450 2400-2570...
- Page 13 0% U ; 1 cycle 70% U ; 25/30 cycles Single phase: at 0º Voltage IEC 61000-4-11 0% U 250/300 cycles interruptions Table 5 – Signal input/output parts Port Immunity test levels Basic EMC Phenomenon standard Home healthcare environment Conducted 3V, 0.15MHz-80MHz disturbances 6V in ISM bands and amateur radio bands between...
- Page 14 controller are connected; 1．The battery is not connected to the controller; 2．The battery is full and no need to be charged. The battery cannot 3．The battery bulges and is be charged scrapped. Please contact the manufacturer to replace the battery. 1.
- Page 15 is inconnected Right Motor Brake Solenoid or Contact Manufacturer Controller Damaged 10100 Left motor Hall wiring is shedding Contact Manufacturer Left Motor Hall Left Motor Hall or Controller is Contact Manufacturer Damaged 10011 Hall connection of right motor fall Contact Manufacturer Right Motor Hall Right Motor Hall or Controller is Contact Manufacturer...
- Page 16 【Expired Date】MM/DD/YYYY 【Batch No.】D/****** 【Labels, Packing Logo Design】 Symbol Introductions Symbol Introductions Batch Code Catalog number Warnings and Precautions non-sterile medical device Manufacture Date Consult instructions for use Keep dry Name and Address of Manufacturer Name Address European Union Representative CE Symbol...
Need help?
Do you have a question about the A06 and is the answer not in the manual?
Questions and answers