Advertisement
Quick Links
8610 Production Avenue l San Diego, California 92121 l (858) 566-7465 l Fax (858) 566-1943
--INSTALLATION INSTRUCTIONS--
Thank you for choosing a BREEZAIRE cooling unit. We believe our products are the best
on the market and will provide many years of trouble free service.
Please take a few minutes and read the entire instruction before beginning the installation.
Before removing the cooling unit from the box, please inspect for damage, which might have
occurred during shipping. If damage is found, notify the Freight Company immediately.
MODEL
INSTALLED BY
While great effort has been made to provide accurate guidelines,
enclosure construction, unit location and many other factors can affect the operation and performance of the unit. Therefore the suitability of the unit for a specific enclosure or
application must be determined by the customer and cannot be warranted by
WKE SERIES
BREEZAIRE is not responsible for any damages during shipping.
BREEZAIRE
(USA ONLY)
.
SERIAL NUMBER
cannot warrant its units to properly cool a particular enclosure. Customers are cautioned that
BREEZAIRE.
.
DATE
.
.
Advertisement
Related Manuals for Breezaire WKE 3000
Summary of Contents for Breezaire WKE 3000
-
Page 1: Installation Instructions
8610 Production Avenue l San Diego, California 92121 l (858) 566-7465 l Fax (858) 566-1943 --INSTALLATION INSTRUCTIONS-- Thank you for choosing a BREEZAIRE cooling unit. We believe our products are the best on the market and will provide many years of trouble free service. -
Page 2: Enclosure Construction
(see fig. 3). If there is no airflow or no change in temperature on either side, contact your dealer. BREEZAIRE units should not be installed in a fire rated wall without consulting your local building inspector and building codes. - Page 3 If your installation cannot be performed in accordance with these instructions contact your dealer. The unit must be installed in the upright position and is not designed to have duct work on either the warm air or cold air sides. Do not drill any holes into the cooling unit. It may damage the unit, promotes rust, and will void the warranty. Do not install the unit so that its removal will be difficult or impossible.
-
Page 4: Operation
BREEZAIRE is extremely proud of the quality and reliability of its products. Experience has shown that of the small number of problems encountered, the large majority are due to improper unit selection or enclosure construction. -
Page 5: Condensate Drain Tube
Your BREEZAIRE wine cooling unit is designed to maintain the proper temperature and humidity in a well-insulated and sealed enclosure. If the "cellar" is not well sealed, infiltration of outside moisture will cause loss of humidity control, possible damage to the wine and an overflow of condensate from the unit. - Page 6 CLEAR TUBING RED PLUG The BREEZAIRE Sentinel II is the precision micro-processor control system that makes the WKE Series the most sophisticated wine cooling units available. The Sentinel II features a remote display and control panel that serves as a wine cellar temperature display, programming panel and alarm.
- Page 7 When the cooling unit is plugged in and receiving electrical power the top arrow will be lit. This top arrow will blink when the compressor is operating and the unit is cooling. The middle arrow is lit when the programming is being changed.