Table of Contents
Advertisement
Maintenance
The level of safety and efficiency of this piece of equipment can be maintained only by regularly checking all its components.
NB: If you find any damaged, broken or worn part, please notify Pilatech Srl as soon as possible to have the part replaced or repaired
by one of our service engineers.
In the meantime, do not use the equipment.
More specifically, periodically assess the condition of the components and how the following components are assembled:
• Frame: The wooden part must be cleaned with a damp cloth and a small amount of mild soap.
Never use alcohol based or harsh cleaning products.
• Use a brush to remove any dust collected in all recessed areas.
• Metal parts: The metal parts do not normally require any maintenance. Clean the metal parts with the same cloth used for the
wooden frame.
• Sliders and moving parts: These parts do not normally require any lubrication. If required, only use dry lubricants (PTFE, dry
Silicone)
Using oils and greases will only cause more dust and dirt build-up, which negatively affects the operations of the various components.
Keep the rails and sliders clean by using the same cloth used for the wooden parts, making sure to remove all the dust, hair and
other dirt that may have built up. If necessary, also use a brush.
• Screws: periodically check that all the screws are securely tightened, i.e. the screws used to assemble the piece of equipment and
those used to fix it to the wall.
If thy require tightening, use the tools supplied or a Phillips head screwdriver of the correct size.
Service centre: Ufficio Tecnico Pilatech - via F. Turati, 28/A - 22060 CABIATE (CO) - Italy
Tel: +39 031 766599 – Fax +39 031 768691 - email: assistenza@pilatech.com
Before using the piece of equipment
Carefully read this instruction manual.
Open the boxes in the order shown and follow the instructions shown by the associated pictures.
Make sure that all safety instructions are followed.
Advertisement
Table of Contents
