Advertisement
Quick Links
5869
Holdup Switch/Transmitter
The 5869 Holdup Switch/Transmitter is a finger-operated RF transmitting device. It is
typically mounted under a counter or money draw for inconspicuous operation. When
the transmitter is activated, it emits an RF signal to the receiver. The security system
control panel sends a burglary alarm to the central station when a RF signal is received
from an enrolled Holdup Switch/Transmitter.
Once activated, the 5869 Holdup Switch/Transmitter can only be reset by the reset
key. The 5869 also incorporates tamper switches that are activated when the cover is
removed, or if the unit is forcibly removed from its installation location.
F E AT U R E S & B E N E F I T S
• No wires to run
• Front and back tamper resistant
• Easily mounted
S P E C I F I C AT I O N S
PHYSICAL
1-15/16" W x 5-15/16" H x 1-3/16"D
(50mm x 150mm x 30mm)
FREQUENCY
345MHz
BATTERY
3-volt Lithium. ADEMCO 466 or equivalent.
• Quick enrollment
• Includes battery
AGENCY LISTINGS
UL Listed for Household Burg UL1023 and
Hold Up Burg UL636. Using 5881ENHC
with appropriate ADEMCO commercial
listed panels
COMPATIBILITY
Fully compatible with all VISTA®
Control Panels
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for resideo 5869
Summary of Contents for resideo 5869
- Page 1 Holdup Switch/Transmitter. Once activated, the 5869 Holdup Switch/Transmitter can only be reset by the reset key. The 5869 also incorporates tamper switches that are activated when the cover is removed, or if the unit is forcibly removed from its installation location.
- Page 2 No. RF) Type. Before mounting the 5869 permanently, 6 x 3/4 screw (supplied) at the • The 5869 is one closed input loop zone perform Go/No Go tests to verify breakaway tamper release. (loop 1).
Need help?
Do you have a question about the 5869 and is the answer not in the manual?
Questions and answers