Twoey 2070 Quick Start Manual

2070
SMALL OUTDOOR
ROLE PLAY
Assembly Instructions.
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.

Tools Required.

NOTE.
A #3 Tip Pozidrive Screwdriver must be used, otherwise damage to the
screw head may occur.

Maintenance.

Some residual dust from the manufacturing process may be apparent
This will wipe off with a damp cloth.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.
We recommend the unit be secured to the ground to avoid
damage in the event of adverse weather conditions.

Weathering Effects.

Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause rot within
the material. Should staining occur it is suggested that the surface be
cleaned with a mild detergent
Fading may occur if left in direct sunlight for prolonged periods of
time.
THIS PRODUCT WILL NOT PROTECT ANY ITEMS STORED
WITHIN FROM THE WEATHER.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
2070 - Small Outdoor Role Play (CS0646)
"Leave Me Outdoors Range"
Adults Required For Assembly.
.
Tel: 016973 49774/45300 Fax: 016973 45511
Manufactured by:
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Email: info@twoeytoys.com
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Cumbria CA7 8EW
13/05/2014
.