Advertisement
SAFETY PRECAUTIONS WHEN RUNNING
A.Have a qualified electrician hook up correct power
to the machine, grounded properly, with correct
breakers at electrical source.
B.When breaking down machine to change stones or to
check machine always disconnect power to the
machine.
C.Check for wear to ensure no exposed wires.
D.When grinding wet, employees must wear proper
footwear.
E.Always wear appropriate safety protection such as
eyewear, hearing and if needed respiratory
protection.
F. When grinding, watch for problems on the floor such
as bad joints, electrical covers, studs that can cause
injury to operator or machine.
G.Keep machines clean so any potential problems are
visible.
H.When using base machines, use guards for wet or
dry grinding.
I. Also when using base machines, operate with
flexible shaft and housing as parallel to motor as
possible to avoid kinks. Keep flex-shaft greased.
TERRCO GRINDERS
Advertisement
