Advertisement
90mm
DC IN
Switch
AUX IN
HouseParty 7
Volume -
Pause
Volume +
Connect the adaper to DC IN port,press the switch,HouseParty 7 enter the Bluetooth operating mode.(1) It can be connected to
mobile phone via bluetooth function for music playing.(2) AUX IN mode:connect HouseParty 7 to other Devices via AUX IN port
for music playing. Volume +/- buttons can control the volume, Pause button can pause the mousic palying.
90mm
Thank you for buying the GEAR4 HouseParty 7, wireless portable speaker for any Smartphone, Tablet, MP3 Player, PC or
Mac with Bluetooth. Please read this manual before use and retain it for future reference.
GEAR4 ONE-YEAR WARRANTY
GEAR4 HK Limited, trading as GEAR4, warrants this product to be free from defects in workmanship and materials
at the point of sale. Subject to this product being used in accordance with its instructions for use, the product shall
continue to be free from defects, for a period of one (1) year from the date of original purchase. Any damage or defects
caused by a failure to follow the instructions which relate to this product or as the result of an accident, abuse, misuse,
misapplication, product modification, faulty ancillary equipment, improper voltage or current, lightning or other acts of
God, commercial non-home use, normal wear and tear, shipping damage or loss, damage to digital media players or
damage caused by the actions of anyone other than GEAR4 HK Limited are expressly excluded from the warranty stated
above. GEAR4 HK Limited will, at its sole election, repair or replace any product that proves to be defective in either or
both of workmanship or materials and as covered by this warranty. If the product is no longer manufactured or is out
of stock at or after the time GEAR4HK Limited learns of the warranty claim, GEAR4 HK Limited may, at its sole election,
replace your product with a similar product. GEAR4 HK Limited's liability is limited to the repair or replacement, of any
defective product under warranty and any incidental or consequential damages are expressly excluded to the fullest
extent permitted by law. This warranty is not transferable and does not extend to users other than the person who
originally purchased the product. Nothing in this manual shall limit or exclude liability of GEAR4 HK Limited for death or
personal injury resulting from GEAR4 HK Limited's negligence, for fraud or fraudulent misrepresentation or breach of the
terms implied by Section 12 of the Sale of Goods Act 1979. This warranty gives you specific legal rights in addition to the
ones afforded you by the laws of your country. This warranty is not intended to operate to limit such legal rights.
AUSTRALIAN CONSUMER LAW
In Australia, the Trade Practices (Australian Consumer Law) Amendment Regulations 2010 (No. 1) apply. Our goods
come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
WARNING
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified may result in hazardous
radiation exposure. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
UNPACKING AND INSTALLATION
Unpack your unit carefully. We recommend that you save the packaging in case you ever need to store your unit. To avoid
damage, never place the unit or its batteries near radiators, in front of heating vents, under direct sunlight or near water.
87mm
FOR YOUR SAFETY
• When disconnecting the power supply, pull the plug first. Do not pull the cord by itself.
• Never handle the power plug with wet hands, as this could cause fire or electric shock.
• Refer servicing to qualified personnel only.
• Do not open the housing.
• Do not twist or pinch the power supply cord. If the plug or power supply cord needs to be replaced, ensure
that it complies with the manufacturer's recommendation.
• Unplug the unit during lightning storms and when unused for extended periods of time.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
•
The plug considered as disconnect device of adapter.
DISPOSAL
According to the European Directive 2002 / 96 / EC all electrical and electronic products must be collected
separately by a local collection system. Please act according to your local rules and do not dispose of your old
products with your normal household waste. The wheeled bin mark indicates that this product should
not be disposed with other household waste throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
FCC RULES
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This
87mm
device may not cause harmful interference and 2) This device must accept any interference received, including
interference that may cause undesired operation.
INDUSTRY CANADA
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: 1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. Under Industry Canada regulations,
this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication. This Class B digital apparatus complies with Canadian ICES-003.
ATTENTION
L'utilisation des commandes ou les réglages de performances par des procédures autres que celles spécifiées risquent
d'entraîner une exposition à des radiations dangereuses. Les piles (piles incluses ou installées) ne doivent pas être exposées
à une chaleur excessive, notamment aux rayons directs du soleil, à une flamme ou source similaire.
DÉBALLAGE ET INSTALLATION
Déballer l'appareil avec soin. Nous recommandons de conserver l'emballage, pour tout stockage prolongé éventuel de
l'appareil. Pour éviter tout endommagement, ne jamais placer l'appareil ou ses batteries près d'un radiateur, près d'une
bouche d'aération, sur un rebord de fenêtre exposé au soleil ni près d'une source d'eau.
DANS L'INTÉRÊT DE LA SÉCURITÉ
• Pour débrancher l'adaptateur d'alimentation, tirer sur la fiche. Ne jamais tirer sur le cordon.
• Ne jamais manipuler la fiche d'alimentation avec des mains mouillées, sous peine d'électrocution ou d'incendie.
• Consulter exclusivement un personnel qualifié pour toute réparation
• Ne pas ouvrir le boîtier.
• Ne pas tordre ni pincer le cordon d'alimentation. Si la fiche ou le cordon doivent être remplacés, vérifier
qu'ils sont conformes aux recommandations du fabricant
• Débrancher l'appareil pendant les orages avec foudre et lorsqu'il n'est pas utilisé pendant une période
prolongée.
• Lorsqu'une prise secteur ou un connecteur est utilisé en tant que dispositif de déconnexion, le dispositif de
déconnexion doit rester opérationnel.
MISE AU REBUT
Conformément à la directive européenne 2002 / 96 / EC, tout appareil électrique ou électronique doit être collecté
séparément par un système local de collecte des déchets électriques et électroniques. Respecter les
lois et réglementations en vigueur et ne pas mettre au rebut dans les déchets ménagers. Le symbole
avec une poubelle barrée signifie que ce produit ne doit pas être mis au rebut avec les déchets
ordinaires. Afin d'éviter tout risque à l'environnement ou la santé humaine lié à des mises au rebut
non contrôlées, procédez à un recyclage responsable afin de promouvoir la réutilisation durable des
Advertisement
