Advertisement
5. OPERATION
5.1 Direct the lens away from your eyes before switching on.
Their are two buttons in the switch the top button with an upward
facing arrow turns on the 7 LED array on the top of the lamp. The
downward facing arrow turns on the 24 SMD array. See Fig.1.
5.2 Suspend the lamp by the hanging hook. When the lamp is
hanging from the hook it can be rotated through 360° for more
precise positioning.
5.3 Alternatively use the integral magnet on the rear of the lamp
(Fig.2) to attach to any ferrous surface.
6. MAINTENANCE
6.1 Keep the inspection lamp free from dirt and grease, use a damp
cloth and a mild detergent. Do not submerge the lamp in water or
subject it to any acids or detergent that may degrade the materials
of the lamp's construction.
Environmental Protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, accessories and packaging
should be sorted, taken to a recycling centre and
disposed of in a manner which is compatable with
the environment.
Dispose of this product at the end of its working life in
compliance with the EU Directive on Waste Electrical and
Electronic Equipment (WEEE). When the product is no
longer required, it must be disposed of in an
environmentally protective way. Contact your local solid
waste authority for recycling information.
Battery Removal
Remove the four screws on the back of the lamp (Fig.2)
and the four screws on the top of the lamp surrounding
the 7 LED array. Remove the back casing, and disconnect
the wiring to the charger port and from the battery to the
circuit board. Dispose of batteries according to local
authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack
Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are
registered with Valpak's registered compliance scheme. Jack Sealey
Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
WEEE Regulations
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
phone 01284 757500.
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
LED307.V2
Issue: 1 - 08/04/14
Advertisement
