Summary of Contents for G-Scale Graphics Sound Clip
Page 1
An MP3 Player for your Railroad Operation and Installation Manual G-Scale Graphics 5860 Crooked Stick Dr. Windsor, CO 80550 970-581-3567 GScaleGraphics@comcast.net www.GScaleGraphics.net Revision C: Updated 1/18/2021 Revision G: Updated 1/18/2021 Page...
Page 2
Sound Clip Modules "Sound Clip" modules add life to your railroad via sound effects. Place them in buildings, rail cars, or just hidden behind a rock. The 2.2”L X 1.2”W X 0.7”H circuit board must be protected from the weather.
Page 3
Sound Clip Module Triggering Options Volume Switch The DIP switch controls the volume as shown below. Turn ON each switch in order to increase the vol- ume. Note: When 4 ON, max volume will be set regardless of the other switch settings.
Page 4
Sound Clip Module - Hardware Specifications Board Revision “F” Mechanical Enclosure 3.0” X 1.8” X 1.0” 3D printed Black PETG Snap On Cover 2.2” X 1.2” X 0.7” Wiring User Connections: Screw Terminals, 22 AWG, tinned leads Electrical Power Input Terminals (+,-) 7VDC min to 25VDC max No polarity (despite the label).