Do you have a question about the BIG BALL and is the answer not in the manual?
Questions and answers
Summary of Contents for Pop-A-Shot BIG BALL
Page 1
POP-A-SHOT ‘ ® BIG BALL/ SMALL BALL’ STEEL PREMIUM ELECTRONIC BASKETBALL GAME ASSEMBLY INSTRUCTIONS America’s Ultimate, Strongest and Only Indoor ‘Big Ball/ Small Ball’ Pop-A-Shot – Scores both the Regulation and Small Basketballs. ® Page 1 of 8...
Page 2
A. Leg bolts with extended legs. B. Tighten T-Bar C. Tighten nut on support bolt (included) IMPORTANT FOR PROPER ASSEMBLY WHEN ASSEMBLYING ANY POP-A-SHOT GAME INSERT ALL BOLTS, JUST FINGER TIGHT UNTIL ALL BOLTS ARE IN PLACE THEN TIGHTEN SECURELY. Page 2 of 8...
Page 3
• 9/16" Open End Wrench • 7/16" Open End Wrench • Pliers Step 1: Thoroughly inspect all parts for quantity and defects. Once the unit is assembled, Pop-A-Shot, Inc. is not responsible for damaged parts. Step 2: Raise Front Upright. Insert Bolt into Base.
Page 4
Step 5: Attach Rim with Collar Assembly to the backboard. Top – Brown Attach Ramp use Middle – Black zip ties to the 4 Bottom - Blue grommets to the lower back of the Backboard to allow for adjustments until after side nets are attached.
Page 5
Step 8: Pull Vinyl flap over the top Cross Bar and then under the lower Cross Bar. Attach flap to the Velcro underneath the ramp. Attach the sides of the ramp to the Top Support Bars and along the Back Uprights and the Front Uprights of the game. Make sure All Velcro straps are in place. Step 9: To make the ramp taut, adjust the ties on the Back Upright first and then the ties on the Front Uprights.
Page 6
Important Game Information: This game information is extremely important for Safety, installation, correct play and Game care: Read appropriate game and site recommendations for all Pop-A-Shot games. Do not use the electronic games outdoors. Electronic games are intended for indoor use.
Page 7
If merchandise is damaged in transit it is the customer’s responsibility to properly notate the damage on the freight bill at the time of receipt in order to secure proper settlement from the carrier. Pop-A-Shot, Inc., is not responsible for goods damaged in transit.
Page 8
To obtain warranty service the original purchaser must return the product, together with proof of purchase, to Pop-A-Shot, Inc. 200 N. 3rd Street, Salina, Kansas 67401. All warranty items will be returned to original purchaser freight collect. All non-warranty items will be returned to original purchaser, Net C.O.D., freight collect. The original purchaser must present the sales receipt or other document, which establishes proof of purchase and the date of purchase.
Need help?
Do you have a question about the BIG BALL and is the answer not in the manual?
Questions and answers