Cover5 Cover6 Cover8
Cover5R Cover6R Cover8R
COVER PLATE
for Boston Acoustics Designer Series Ceiling Mount Speakers
The Cover Plate is a blank plate that covers a pre-cut hole for the installation of a Boston Acoustics Designer Series
ceiling-mount speaker. The Cover Plate may also be used with a Boston Acoustics New Construction Bracket.
The Cover Plate can be painted or wall papered to match the wall or ceiling color.
The Cover Plate is ideal when:
1. A house has been pre-wired and the speakers have not yet been purchased.
2. The user moves and wants to take the speakers with them.
3. An installation has been delayed and a temporary cover is needed.
Installation:
1. Loosely attach the bracket bar to the Cover Plate as shown with provided screws.
2. Bring bar to a minimum 2'' gap (or as necessary to just fit over wall-board).
3. Insert the Cover Plate and bracket assembly into the opening as shown.
4. Tighten the screws, compressing the bar and Cover Plate to the ceiling. Do not over tighten.
1
New Construction NCB5
Bracket
Cover Plate
Speaker Models
2
NCB6
NCB8
Cover5 Cover6 Cover8 Cover5R Cover6R Cover8R
351
VRi560 VRi580 336pt
251
361, 261 381
300 Jubilee Drive, Peabody, MA 01960 978-538-5000 Fax: 978-538-5199
Covered by patents issued and/or pending. Specifications subject to change without notice.
Boston and Boston Acoustics are registered trademarks of Boston Acoustics, Inc.
© 2001 Boston Acoustics, Inc. All rights reserved.
Leave minimum
2'' gap
NCBR5
NCBR6
VRi565
335, 315
3
NCBR8
NCBTL5 NCBTL8
-
VRi585
VRi553
DXPRO VRiSub82
-
VRi593
042-001326-3