Download Print this page

Package Contents - Boston Acoustics GT-RSL Install Manual

Remote subwoofer level controller for gt amplifiers

Advertisement

REMOTE SUBWOOFER LEVEL (RSL)
INTRODUCTION
The GT-RSL is an optional accessory that allows the user to remotely adjust the
subwoofer level of your Boston GT
amplifier relative to the main speaker system.
This allows greater tuning flexibility from the listening position. This is useful when
listening to various musical styles where the amount of bass information may
change.
The GT-RSL uses a VCA or Voltage Controlled Amplifier. With this technique,
voltage, not an audio signal is sent to the controller. Changes in the voltage level
effect the output level of the subwoofer. This method has the distinct advantage
over other designs as the audio signal does not leave the amplifier. Therefore,
noise cannot be injected into the system from an external source.
Note: This accessory is only compatible with the GT-50, GT-42, GT-40, GT-28, and
GT-24.

PACKAGE CONTENTS

The GT-RSL is supplied with the following items.
• RSL Controller Unit (Knob, 4m Cable, Mounting Bracket)
• Mounting Screws for Controller Unit
• RSL Controller VCA PC Board
• RSL Port Cover and Pre-attached Mounting Screws
YOU WILL NEED
• #1 Phillips head screwdriver
• Coin (for removing the GT amplifier aluminum top cover)
OPERATION
• Clockwise rotation will increase the subwoofer level.
• Counterclockwise rotation will decrease the subwoofer level.
• It may be necessary to reset the input sensitivity on the subwoofer amplifier
according to user preference and or musical material.
• No other adjustments are required after the initial installation and set-up.

Advertisement

loading