Boston Acoustics A7rc Setup And User Manual page 32

USING THE AVIDEA REMOTE
SETUP AND USE GUIDE
8 Tap the button of the Device you want to go to.
The Device screen appears.
9 Tap the soft or hard buttons with the commands you want to record.
10 Press the Page Up and Page Down buttons to go to different screens of
the same Device.
–or–
Press the Device button to go to the Device Page again.
11 To add delays and beeps to the macro, press the Extra hard button on the
Device Page.
The Extra screen appears.
Note Delays may be required between commands. Some Devices will not respond
to another remote command immediately after turning on.
30
1 To add a delay, tap one of the Delay buttons.
By tapping several Delay buttons, the duration of the delay will
be increased.
2 To add a beep, tap the Beep button.
3 Press the Device button to go to the Device Page again.