Advertisement
Making and Answering Calls
To make a call
Pick up the handset and the
display will show "LINE IN USE".
Use the keypad to enter the number you wish to dial.
When you have finished the call place the handset back on the base.
To make a call through pre-dialing function
Dial the required telephone number first, and you can use the DEL key to delete digits if you make
a mistake;
Pick up the handset or press the H.F key. The number will be dialed out automatically using the
handset or speakerphone mode selected.
To insert a pause in the dialing sequence, press the PAUSE key, which will then show a "P" in the
number.
To answer a call
When a call is incoming, the RING LED will be flashing, pick up the handset or press H.F key to
answer the call, and the IN USE LED will be flashing, when there is unread missed call(s), the NEW
LED flashes.
To mute or un-mute the microphone
During a call press the MUTE key and the LCD will display "MUTE"
To un-mute, press the MUTE key and the LCD will display "LINE IN USE".
PAUSE key
Press PAUSE key will insert a time delay of 3.6 seconds in a dialing sequence.
REDIAL key
Pick up handset or press H.F key, then press REDIAL key to dial the last dialed out number.
To change the earpiece or speakerphone volume during a call
While making or answering a call:
Press ▲ to increase the earpiece or loudspeaker volume, press ▼ to decrease the earpiece or
1)
loudspeaker volume.
2)
The display will show the volume level as you adjust it. The earpiece can be adjusted from 1 to
5, and the loudspeaker can be adjusted from 1 to 6.
¾ Handset volume booster function
1.
At handset conversation mode, if you feel the handset volume too low, press
increase the volume about 10 dB to help you to hear clearly.
2.
Press
key again or pick up the handset next time, the handset volume is return to primary state.
One-touch Memory
¾ Store the number into one-touch memory
1)
In on-hook state, pre-dial a number or scroll to the desired incoming number
2)
Long press M1, M2 or M3 for 2 seconds, there will be a "beep" sound, means the number was
stored.
¾ Dial one-touch memory
In on-hook or off-hook state, press M1, M2 or M3 key, the number is dialed out.
¾ Delete one-touch memory
In on-hook state, press
6. MENU SETTINGS
At on-hook state, pressing the MENU/OK key, press ▲ or ▼ key to select setting item, then press
MENU/OK key to confirm and enter, if you want to exit, press
previous menu.
icon will appear. Or press H.F key,
#
key twice, then press and hold M1, M2 or M3 key to delete it.
icon will appear. Also the
key continuously to go back
39
once to
Advertisement
