VOLTCRAFT SPAS-2400/6 Operating Instructions Manual page 3

OPERATING INSTRUCTIONS
SPAS-2400/6 USB charger
ITEM NO.: 1380497
INTENDED USE
This product provides six USB power outputs for charging USB devices (e.g. smartphones or tablets).
Power is provided via the mains adapter (see "Technical data" section).
The charger is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
• USB charger
• Power adapter
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
MEANING OF SYMBOLS
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The exclamation mark indicates specific risks associated with handling, function and use.
This symbol indicates that this product is built according to protection class II. It is
equipped with reinforced or dual insulation between the mains circuit and the output
voltage.
The product must only be installed and used in dry, enclosed indoor areas. The product
must not become damp or wet, as this creates the risk of a fatal electric shock!
The "arrow" symbol indicates special tips and operating information.
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Only use the product in temperate climates, not in tropical climates. Pay attention to the
operating and storage conditions in the "Technical data" section.
b) Power adapter
• Before connecting to the mains, make sure that your local AC mains voltage matches the
VERSION 02/16
specifications on the nameplate.
• The device was constructed according to protection class II. Only a proper mains
socket (230 V/AC, 50 Hz) of the public supply net must be used as voltage source.
• Never pour any liquids over electrical devices or put objects filled with liquid right next to the
device. If liquid or an object enters the interior of the device nevertheless, first power down
the respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the
mains socket. Do not operate the product anymore afterwards, but take it to a specialist
workshop.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. The plug-in power supply unit
also involves danger to life by electric shock! Allow the product to reach room temperature
before connecting it to the power supply and putting it to use. This may take several hours.
• If the wall plug transformer is damaged, do not touch it; there is danger to life from electric
shock! First, switch off the mains voltage to the mains socket to which the wall plug
transformer is connected (switch off at the corresponding circuit breaker or remove the
safety fuse, then switch off at the corresponding RCD protective switch, so that all poles of
the mains socket are disconnected). You can then unplug the wall plug transformer from the
mains socket. Dispose of the faulty wall plug transformer in an environmentally friendly way;
do not use it any more. Replace it with a wall plug transformer of the same design.
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied mains adapter.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Never leave the product unattended during use.
• The device housing warms up during operation. Ensure that there is sufficient ventilation.
The device housing must not be covered!
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not covered by
these operating instructions, please do not hesitate to contact our technical support or another qualified
specialist.
OPERATING ELEMENTS
2
1
1 Mounting frame
2 Power adapter (not shown)
3 On/off button
4 2 x USB A ports 5 & 6 (2.5 A)
5 2 x USB A ports 3 & 4 (2 A)
6 2 x USB A ports 1 & 2 (2 A)
7 Switch button for the display (voltage <--> current)
8 LED display (blue)
3
4
5
6
7
8