FAURE FV-2651 User Manual page 23

MAINTENANCE
ATTENTION!
Turn the appliance off and/or take the feeder out of the power socket before opening
the dust collection system!
Make sure all cleaned parts are completely dry before reusing the appliance.
CLEANING THE APPLIANCE
• Detach the feeder (7) from the recharging contact (6).
• Switch the appliance off before cleaning it.
• When necessary, clean the appliance with a damp cloth.
ATTENTION!
DO NOT USE SOLVENTS OR OTHER AGGRESSIVE OR ABRASIVE DETERGENTS.
THIS CAN DAMAGE THE SURFACE.
CLEANING THE DUST COLLECTION SYSTEM
ATTENTION!
Empty the dust collection compartment (11A) and clean the filtering system (11B, 11C)
after every use.
Never fill the compartment above the permissible MAX level (11D).
Clean the dust collection system following the instructions below and
paying attention to the figures in the illustrative guide.
• Pull the dust collection system release lever (14) and detach the
dust collection system (11).
• Extract the filtering system (11B and 11D) and empty the contents
of the dust collection compartment (11A).
• Separate the filter protection mesh (11B) from the cyclone filter
(11C) by pulling its rim and clean them both by shaking and
brushing the dust off with care. To do so, use a soft brush to
prevent any damage.
If suction power does not increase after cleaning the dust collection
compartment (11A) and the filtering system (11B and 11C), replace filter
(11C) with a new one.
22