Advertisement
Step
Ensure that your dog door frame is
level, and drill 1/8" (3mm) pilot holes
for your screws or rivets. These
securing points should be distributed
around the sides, top and bottom of
the overlapping sleeve joints of the
internal and external dog door frames.
For solid wood doors, you can use the included screws. For hollow or foam filled
Step
Apply a silicone bead around the
outer frame of the dog door, inside
and outside, to provide a neat finish.
Apply another bead inside the frame,
where the overlapping ends, to
complete the installation with a neat
finish.
Allow the silicone beads to dry for 2
hours before removing the clamps.
The silicone should completely set in
approximately 24 hours.
8
doors, you can use the included rivets.
9
5
Advertisement
