Routine Maintenance; Charging The Battery - Brother BCL-D20 User Manual

Error Message Cause
The cordless handset is too far
Searching for
away from the machine (base unit).
Base Unit
Your machine (base unit) is not
(Base Unit
plugged in.
not detected)
You have not registered the
cordless handset.
The antenna on the right of the
machine (base unit) is in the down
position.

Routine maintenance

Charging the battery

If the battery charge level is getting low, you
should charge the battery. You can see the
battery charge level indicator at the bottom
right of the LCD.
a
Plug the connector into the socket (1)
and then hook the cable around its
retaining clip (2) as shown in the
diagram.
1
b
Plug the AC adapter into the electrical
socket.
(Example for U.K.)
Troubleshooting and Routine Maintenance
Action
Move the cordless handset closer to the
machine (base unit).
Make sure that the machine (base unit) is
plugged in.
Register the cordless handset. (See Registering
cordless handsets on page 4.)
Make sure the antenna is in the up position.
c
Place the cordless handset in the cradle
with the dial pad facing forward.
4
4
2
4
27