Table of Contents
Advertisement
Available languages
Available languages
6. Adjusting Channel Intensity Control
Locate.the.intensity.control.knobs.at.the.top.of.the.unit.under.the.cap..Open.the.cap.first,.slowly.turn.
the.intensity.control.knob.for.Channel.1.clockwise.until.you.reach.the.intensity.recommended.by.your.
medical.professional..Always.start.with.the.lowest.step.and.increase.slowly..Repeat.the.same.process.
for.Channel.2,.if.appropriate..Close.the.cap.after.intensity.setting.ok.
If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation amplitude to a
comfortable level. Cease stimulation and contact your physician/practitioner if problems persist.
BATTERY INFORMATION
A.9-volt.disposable.battery.is.provided.with.your.unit..When.the.low-battery.indicator.appears,.the.bat-
tery.has.become.too.weak.to.power.the.unit.and.will.need.to.be.changed..At.this.point,.the.unit.will.shut.
off.until.a.fresh.battery.is.inserted.
13
English
Advertisement
Table of Contents
