Maintenance And Trouble Shooting; Dismantling; Vspecial Conditions; Optional Accessories - Self Climat DN 50 NT Manual

IV .2

MAINTENANCE AND TROUBLE SHOOTING

The operations that can be done by user are limited to installation and connecting up.
Any dismantling, repair or modification to the overfill prevention device automatically cancels the
manufacturer's warranty.
Consequently, this work can only be done by the «Self Climat» company after return of the
appliance to the factory.
In the event of a fault on the overfill prevention device it should be returned to :
An electrical continuity test must be done every year. This test can only be done
by personnel authorised to work on equipment for use in explosive atmospheres.
IV .3

DISMANTLING

The overfill prevention device can only be dismantled in the event of malfunctioning or replacement.
It can only be dismantled by personnel authorised to work on equipment for use in explosive
atmospheres.
V) SPECIAL CONDITIONS
Self Climat automatic overfill prevention devices are guaranteed for one year from the invoice date
against manufacturing faults accepted by our factory.
Our overfill prevention devices cannot be modified in any way without causing a loss warranty.
As we do not install the equipment ourselves no claim whatsoever for indemnity will be accepted
whether for direct or indirect causes.
VI)

OPTIONAL ACCESSORIES

Support clamp
Description
Support clamp 50/60
Support clamp 80/90
Self Climat
Rue des Epinettes
Z.I SUD
F - 77200 TORCY
Reference
308 242
308 243
15