Do you have a question about the MIR and is the answer not in the manual?
Questions and answers
Summary of Contents for monster tower MIR
Page 1
Failure to tighten this can result in a lost mirror, which is not covered by warranty. Test this by pulling on the mirror each time before use. 1 of 4 MTTMB-V2-061205 Copyright 2002-2005, Monster Tower, Inc.
Page 2
Monster Tower Mirror Parts List Item Description Hex head Cap Screws Collar Insert Mounting Post Clamp Screws Mounting Post Mirror Arm / Receiver Tube Cam Lever Adjuster Knob CIPA Model M1C Mirror (optional) INSTALLATION OF MIRROR ARM 1. Select a suitable location for your mirror, normally on the front right leg of your tower. This should not be mounted on a horizontal tube.
Page 3
4. Attach the mirror arm to the mounting collar and adjust the completed assembly to the correct position. COMPLETED MIRROR OPTIONAL CIPA EXTREME MIRROR ADAPTER CIPA EXTREME MIRROR ADAPTER CIPA EXTREME ADAPTER 3 of 4 MTTMB-V2-061205 Copyright 2002-2005, Monster Tower, Inc.
Page 4
Any modifications or improper use, not approved in writing by Monster Tower, shall void this warranty. I hope you find reading this stuff as boring as I find writing it. Monster Tower is not responsible for personal injury or damage to the boat caused by the use of this product.
Need help?
Do you have a question about the MIR and is the answer not in the manual?
Questions and answers