Cleantecs SOLA-TECS 0200272 Operating Manual

Di resin filter

Advertisement

®
PHOTOVOLTAIC CLEANING SYSTEM BY CLEANTECS
Operating manual
DI resin filter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOLA-TECS 0200272 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cleantecs SOLA-TECS 0200272

  • Page 1 ® PHOTOVOLTAIC CLEANING SYSTEM BY CLEANTECS Operating manual DI resin filter...
  • Page 2 Foreword By selecting the Cleantecs full water desalination unit for your water processing system you have chosen a high-quality product. The full water desalination operates using the ion exchange principle. The dissolved minerals responsible for the water hardness and conductivity (TDS value) are removed from the water.
  • Page 3 1.1 General Observe the respectively applicable directives and regulations and the currently valid accident prevention regulations. Cleantecs accepts no liability for any water damage that may occur. Ensure that the application location has an adequate water drain. Close the supply stopcock when the unit is shut down for longer periods (e.g. during the weekend).
  • Page 4 2. Technical data Performance / capacity x 1°dH (1,24°E) x 1 litre 80000 Max. performance (litres) at 10°dH (12,4°E) 8000 Flow / hour up to 600l Permissible pressure (bar) Water temperature max. (°C) Water temperature min. (°C) Pure water quality (ppm) <10 3.
  • Page 5 4. Transport & packaging 4.1 Incoming goods inspection of the cartridges Cleantecs cartridges are carefully checked and packed before shipping. However, damage incurred during transport cannot be ruled out. Check the packaging in the presence of the delivering party for signs of external damage.
  • Page 6 5. Installation and commissioning 5.1 Installation location and on-site prerequisites • Water supply connection • The supply water must conform to the German Drinking Water Directive • Supply water temperature max. 30°C • Temperature at application location 4° to 40°C •...
  • Page 7 3. Remove the cartridge from the carriage by releasing the hose clips and hose connections (9). 4. Replacement of the resin can be organised by the specialist dealer. 5. The 50 litre replacement filter can be obtained through Cleantecs sales channels. Note that water in the hoses escapes on disassembly!

Table of Contents