Volter BEACH-set Ioperating Instructions For The Accessory

Volter BEACH-set Ioperating Instructions For The Accessory

Xrover reha cart

Advertisement

OPERATING INSTRUCTIONS FOR THE ACCESSORY
Thank you for purchasing the BEACH-set accessory for the xRover REHA cart and we
believe that it will serve you for a long time.
XRover cart - with the BEACH-set accessory can be used to transport people on sandy
terrain (beach / desert).
The xRover REHA product complies within the following standards:
CSN EN 1888: 2012 - as a pram
CSN EN 15918: 2013 - as a cart behind a wheel
CSN EN 12189: 2014 - as a wheelchair.

Technical parameters:

rear wheel diameter: 19 " / 49 cm
-
width of the rear wheel: 22 cm
-
front wheel diameter: 11 " / 28 cm
-
front wheel width: 18 cm
-
recommended wheel inflation pressure: 0.6 KPa
-
weight of BEACH set including transport bag: 10.5 kg
-
Please read these operating instructions
carefully before using the BEACH-set with the
xRover REHA:
BEACH-set
TO THE PRODUCT xRover
ATTENTION!
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BEACH-set and is the answer not in the manual?

Questions and answers

Summary of Contents for Volter BEACH-set

  • Page 1 Thank you for purchasing the BEACH-set accessory for the xRover REHA cart and we believe that it will serve you for a long time. XRover cart - with the BEACH-set accessory can be used to transport people on sandy terrain (beach / desert).
  • Page 2 EACH-set is supplied in a set of two rear wheels with axles, front wheel with fork and transport bag Placing the wheels in the bag is done by placing one rear wheel on the bottom of the bag with the axle facing up The second rear wheel is placed on it with the axle down, always so that the axles hide in the recesses at the centre of the opposite wheel...
  • Page 3 We proceed in the same way when deploying the second wheel. The wheels are dismantled in the reverse order. ATTENTION! We never put on a BEACH-set with a person sitting in xRover! Accident may result in possible overturning of the cart Now we put on the front wheel with a fork.
  • Page 4 Beach set so that it cannot start on its own! The BEACH-set is intended as an accessory to xRover carts, and is used to transport people sitting in xRover exclusively on beaches and in desert sand.

Table of Contents