Advertisement
Tools Required: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue
Fig. 1
S
1.
Spread a thin layer of glue in the dowel holes in the Left Side Assembly (Rb). Making sure the
curved edge of the front stretcher faces the front of the unit and all pocket drilled holes
face down, insert the Front Stretcher (J), Back Stretcher (K), and Shelves (L) into the Left Side
Assembly (Rb). Gently tap with a mallet and quickly wipe away any excess glue. Using the pocket
drilled holes as guides, fasten in place with #8x1-3/16" Pan Head Screws (S). See Figure 1.
2.
Spread a thin layer of glue in the dowel holes in the Right Side Assembly (Qb). Insert the left side
assembly and quickly wipe away any excess glue. Using the pocket drilled holes as guides,
fasten in place with #8x1-3/16" Pan Head Screws (S). See Figure 2.
Assembly Instructions
L
Qb
J
L
K
S
The backs
Rb
of the Left and
Right Side
Assemblies
are grooved.
S
S
Page 3 — 901Wc — 06/10
x 6
x 6
Advertisement
