Advertisement
Table of Contents
ASSEMBLY INSTRUCTION
(for connecting the wire of the light on this curio)
Item#: 5291-50001 Bunching Curio Cabinet
***
Caution: Please read all instructions carefully before starting the assembly process.
Please note this curio can be used alone with can light on by a touch dimmer. Also, when
two or more are bunched together, you can control all can lights by touching one dimmer.
Diagram 1
Diagram 2
Assembly steps:
1. When each piece of curio is used alone, attach male connector of the power switch (A) to a wall
plug. (see diagram 1)
1/2
Advertisement
Table of Contents
Related Manuals for HOUZZ Bunching Curio Cabinet
Summary of Contents for HOUZZ Bunching Curio Cabinet
- Page 1 ASSEMBLY INSTRUCTION (for connecting the wire of the light on this curio) Item#: 5291-50001 Bunching Curio Cabinet Caution: Please read all instructions carefully before starting the assembly process. Please note this curio can be used alone with can light on by a touch dimmer. Also, when two or more are bunched together, you can control all can lights by touching one dimmer.
- Page 2 2. Touch dimmer is at the inside of right post. 3. If you want to bunch two or more curios together, place them all side by side in a desired location. 4. Leave male connector of the can light (C) and female connector of power Switch (B) for the first curio (#1) as it is.
Need help?
Do you have a question about the Bunching Curio Cabinet and is the answer not in the manual?
Questions and answers