Radio Controls - Boss Audio Systems 630U User Manual

RADIO CONTROLS

AS/PS Select six strong stations and store them in current band.
1. Select a band (if needed)
2. Hold A/PS button for more than three seconds. The new stations
replace stations already stored in that band.
Preset Scan
Scan stations stored in current band
1. Select a band (if needed)
2. Touch A/PS for more than one second but less than three seconds.
Radio pauses for five seconds at each station. Touch A/PS again to stop
scanning when desired station is reached.
SCAN This key is operated as RADIO SCAN. The operation is similar as
normal search but different thing is holding 5 seconds on every station
detected in RADIO SCAN mode.
BAND Push this switch to select the desired band. Selection is made in
regular sequence as FM-AM.
TUNE BUTTONS When pressed for less than 1 second, these keys operate
as manual tuning mode.
When pressed longer than 1 sec., they are operated as SEEK tuning mode.
2 sec.
If the keys are not pressed for 3 seconds, they will return to SEEK mode
AUDIO ESP
again.
2 sec.
AUDIO ESP
SETTINGS MODE When press this button for more than 2 seconds, it is activated
2 sec.
AUDIO ESP
as selecting mode of these function.
2 sec.
AUDIO ESP
SEEK 1: Normal seek mode for the next radio station.
SEEK 2: User can bypass frequencies by holding down the button
Seek will only begin when this button is released.
3309(630UA) -IM.indd 7
STATION PRESETS Six numbered preset button store and recall sta-
tions for each band.
Storing a station:
1. Select a band (if needed)
2. Select a station
3. Hold a preset button longer than one second. Preset station num-
ber appears in the display when station is saved.
Recall a station:
1. Select band (if needed)
2. Press a preset button for less than one second to select stored sta-
tion.
ESP 12s. / 45s.
VOL
AUDIO MULTI CD MULTI ON/OFF
VOL
AUDIO MULTI AUDIO BEEP
VOL
AUDIO MULTI AUDIO BEEP AUDIO
BEEP ON/OFF
SEEK SEEK1 / SEEK 2
VOL
AUX IN
or .

12/12/06 12:24:40 PM