Timer - La Crosse Technology 515-1912 Quick Start Manual

T I ME R
Set Timer:
1. Hold the TIMER button until you see the Minutes begin to flash. Press the + or – button to adjust the
minutes (1-99).
2. Press the TIMER button to confirm and exit. Timer Icon
Start/Pause/Restart Timer:
• Timer will start automatically once it is set.
• Press the TIMER button to pause the timer. Timer Icon will flash.
• Press the TIMER button again to resume the timer countdown.
Stop Timer:
• While the timer is showing, press any button except TIMER button, to stop the timer.
• The Timer will automatically return to the last countdown time set. This value will show for 3 seconds
then clock will default to normal clock display with Temp/Humidity.
Example: If the Timer was set for 15 minutes and stopped before it reached zero, the Timer will
automatically reset to 15 minutes. Remaining time for the Timer will no longer be saved.
• User will need to enter TIMER SETTINGS to change the Timer duration.
• Press TIMER at any time to start or stop the timer countdown.
Timer Sounds
• When Timer Countdown reaches 0, the timer will sound 5 beeps every 15 seconds for up to up to 1
minute. Press any button to stop the sounding timer.
Atomic Digital Clock
Set Timer Minutes
(1 to 99 minutes)
will show when Timer is active.

Timer

Countdown
Page | 6