Wiring Diagram - Procopi Delta AQUAMAT 3001 Installation And Commissioning Instructions

CONNECTION•OF•THE•CLEANING•MANIFOLD BOOSTER•PUMP (Option)
The booster pump is powered via a cable 3 x 2.5 2 connected to terminals 2 and 6 of the contactor
located to the left of the 220 V power supply. Connect the earth wire of this cable to the earth
terminal.
Note: The cleaning manifold is not compatible with pools more than 6 metres wide.
The cleaning manifold will clean the cover each time it is opened or closed if its control switch (to the
right of the on/off switch) is closed.

WIRING DIAGRAM

Electrical box connection terminals
Ferrite ring
Power supply 220 V + Earth
Key switch box
Booster
AQUAMAT 3001
(cleaning manifold option)
Connection box
To the AQUAMAT motor
(already cabled)
13/16
2014/05 - Indice de révision : D - code : 0034401