Summary of Contents for Jafar 9118
- Page 1 ASSEMBLY AND OPERATING MANUAL FOR INDICATOR 9118 ASSEMBLY AND OPERATING MANUAL FOR INDICATOR 9118 06-2018...
- Page 2 Valve position indicator type 9118 is used for the determination of the controlled valve open/shut position. The indicator has been designed for maintenance-free operation. However, full switching is required at least once a year. Tools needed for indicator setting: Wrench 10 mm...
- Page 3 3. After setting the indicator dials, assemble the lid with the indicator in the body making sure that the guides within the body are aligned with the indicator rails. Otherwise, the indicator will not be working properly. ASSEMBLY AND OPERATING MANUAL FOR INDICATOR 9118 06-2018...
- Page 4 4. Screw the lid to the column with two screws and set the OPEN or SHUT position dial in the indicator’s viewing window. Perform the full switching cycle according to the declared number of rotations of the slide on which the indicator will be assembled. ASSEMBLY AND OPERATING MANUAL FOR INDICATOR 9118 06-2018...
- Page 5 Setting the indicator on a slide with ground level Telescopic indicator type 9118 has the option of adjusting its height in relation to the ground level with the tolerance of 500 [mm]. First, fit the indicator on the slide and then establish its position against the ground. Before fitting the indicator on the slide, the top lid must be disassembled again in order to determine the length of the spindle, and you must make sure that the fitting to which the indicator is being assembled is in the fully open or shut position.
- Page 6 Failure to comply with the guidelines and instructions in this document releases the manufacturer from all obligations, liability and guarantee. Due to continuous business development, we reserve the right to introduce modifications and design changes to the presented product. ASSEMBLY AND OPERATING MANUAL FOR INDICATOR 9118 06-2018...