TQ KTX2-F Operation And Lnstallation Manual
  1. Manuals
  2. Brands
  3. TQ Manuals
  4. Marine Radio
  5. KTX2-F
  6. Operation and lnstallation manual

TQ KTX2-F Operation And Lnstallation Manual

Mode-s transponder, flat (160mm) format
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TO Av¡at¡on
EASA.AP445
KTX2-F.01 00
MAN
KTX2-F.0001
MAN
Operation and
lnstallation
Manual
Doc.-No.
lssue:
ECR-No.
Date:
MoC:
KTX2-F.A-MAN
0001
KTX2.F.A-ECR.O204
2019-07-03
0
Document Release
lFunction
Name
Ðate
Signature
Prepared by
Checked by
Thomas Wähner
Florian Holzner
2019-07-03
/,
2019-07-03
iV
w,1,,-
áz
Approved
by
Thomas Eilers
2019-07-03
KTX2-F.A-MAN.0001.docx
Page
1
of74
@
TQ-Systems
GmÞH.
All
¡nformat¡on
contained
¡n
th¡s documents have
to
be treated
strictly
conf¡dential. The transfer
of
presentations
and
know-how to
third
parties
requ¡res the pr¡or wr¡tlen consent of
TQ-Systems
GmbH.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KTX2-F and is the answer not in the manual?

Questions and answers

Related Manuals for TQ KTX2-F

Summary of Contents for TQ KTX2-F

  • Page 2 TQ Aviation KTX2-F.0100 EASA.AP445 KTX2-F.A-MAN.0001.docx Page 2 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 3 Operation and Installation Manual KTX2-F.A-MAN.0001.docx Page 3 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 4 Date Added Name KTX2-F.A-MAN.0001.docx Page 4 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 5 Description of Change Revision KTX2-F.A-MAN.0001.docx Page 5 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 6: Table Of Contents

    5.1.3 Ground Switch ......................59 KTX2-F.A-MAN.0001.docx Page 6 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 7 Figure 15: Button functions in Setup Mode..................... 31 KTX2-F.A-MAN.0001.docx Page 7 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 8 Figure 50: Panel Cut-Out ........................66 KTX2-F.A-MAN.0001.docx Page 8 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 9: General

    Supplemental information for operating the device. KTX2-F.A-MAN.0001.docx Page 9 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 10: Abbreviations

    Programmable Read-Only Memory KTX2-F.A-MAN.0001.docx Page 10 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 11 Minimum Triggering Level KTX2-F.A-MAN.0001.docx Page 11 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 12 Visual Flight Rules KTX2-F.A-MAN.0001.docx Page 12 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 13 Augmentation System (GPS) KTX2-F.A-MAN.0001.docx Page 13 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 14: Customer Support

    Information on software updates are available at TQ. https://www.tq-avionics.com/ KTX2-F.A-MAN.0001.docx Page 14 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 15: Features

    Ground-Switch support • KTX2-F.A-MAN.0001.docx Page 15 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 16: Safety-Conscious Utilization

    The transponder is to be used only inside the declared limits. KTX2-F.A-MAN.0001.docx Page 16 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 17: Operation

    Figure 1: Display Diagram KTX2-F.A-MAN.0001.docx Page 17 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 18: Controls

    Figure 2: Controls KTX2-F.A-MAN.0001.docx Page 18 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 19: Display Indications

    Figure 3: Indicators KTX2-F.A-MAN.0001.docx Page 19 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 20: Normal Operation Menu Structure

    Figure 4: Operational menu structure KTX2-F.A-MAN.0001.docx Page 20 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 21: On/Off Switching

    The normal operation always starts in standby mode. The normal operation display is shown as follows: KTX2-F.A-MAN.0001.docx Page 21 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 22: Transponder-Modes

    The ADS-B out function is enabled by default if a GNSS device is configured (see 3.4.2.1.3.4). KTX2-F.A-MAN.0001.docx Page 22 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 23: Squawk Code Change

    The top line shows always the active squawk. KTX2-F.A-MAN.0001.docx Page 23 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 24: Vfr - Squawk

    (see 3.4.3). KTX2-F.A-MAN.0001.docx Page 24 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 25: Squawk Ident (Id, Spi)

    Depending on the status either “FLY” (Flight) or “GND” (Ground) is shown on the display in the lower right corner. KTX2-F.A-MAN.0001.docx Page 25 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 26: Figure 9: Airborne/Ground Indication "Fly

    (see 2.2.2). KTX2-F.A-MAN.0001.docx Page 26 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 27: Ads-B Status Indication

    Note: Above images show the upper left section of the display only. KTX2-F.A-MAN.0001.docx Page 27 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 28: Adjustable Parameters In Normal Operation Mode

    KTX2-F.A-MAN.0001.docx Page 28 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 29 The settings can only be configured in setup mode, see chapter 3.4.1. KTX2-F.A-MAN.0001.docx Page 29 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 30: Gnss Data

    Press the rotary knob to return to the normal operation display. KTX2-F.A-MAN.0001.docx Page 30 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 31: Setup Mode

    Figure 15: Button functions in Setup Mode KTX2-F.A-MAN.0001.docx Page 31 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 32: Figure 16: Setup Mode Menu Structure

    Figure 16: Setup mode menu structure KTX2-F.A-MAN.0001.docx Page 32 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 33: Entering Set Up

    The “IDENT” button can be used for cancelling, discarding or returning. KTX2-F.A-MAN.0001.docx Page 33 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 34: Setup Menus

    If this mode is selected the button illumination is switched off. No further parameters can be configured. KTX2-F.A-MAN.0001.docx Page 34 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 35: Figure 20: Button Illumination Mode "Off

    Press the rotary knob to save the new value. KTX2-F.A-MAN.0001.docx Page 35 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 36: Figure 22: Button Illumination Mode "Auto

    Figure 22: Button Illumination Mode "Auto" KTX2-F.A-MAN.0001.docx Page 36 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 37: Flight-Identifier (Flight Id)

    (see 3.4.2.3) and add a new one as shown below. KTX2-F.A-MAN.0001.docx Page 37 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 38: Figure 25: Flight Id Edit Menu

    See chapter “4 Self-Test, Errors and Warnings” KTX2-F.A-MAN.0001.docx Page 38 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 39: Figure 26: Device Parameter Configuration Menu

    The submenu “Device Parameter” consists of two (2) pages. KTX2-F.A-MAN.0001.docx Page 39 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 40: Table 2: Gnd Switch Support

    “Maximum Speed” is displayed. KTX2-F.A-MAN.0001.docx Page 40 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 41: Figure 29: Maximum Speed Category Selection Menu

    Turn the rotary switch to select the desired speed category and press the rotary knob to confirm. KTX2-F.A-MAN.0001.docx Page 41 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 42: Table 3: Certitified Gnss Units

    Figure 30: GNSS Device Selection Menu KTX2-F.A-MAN.0001.docx Page 42 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 43: Table 5: List Of Supported Gnss Devices

    Figure 31: Baud Rate Selection Menu KTX2-F.A-MAN.0001.docx Page 43 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 44: Figure 32: Aircraft Length/Width Configuration Menu

    E.g.: If the width is 9.31 m, the value must be 09.4 KTX2-F.A-MAN.0001.docx Page 44 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 45: Figure 33: Gnss Antenna Offset Configuration Menu

    E.g.: If the offset is 1.3 m to left side, the value must be -02. KTX2-F.A-MAN.0001.docx Page 45 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 46: Figure 34: Delete Flight Id Menu

    (see note below). KTX2-F.A-MAN.0001.docx Page 46 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 47: Modify Vfr

    4. Repeat steps 2 and 3 until all four (4) digits are set to desired VFR squawk code. KTX2-F.A-MAN.0001.docx Page 47 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 48 VFR Squawk = 1200 KTX2-F.A-MAN.0001.docx Page 48 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 49: Factory Reset

    “Device Info” is displayed (see 3.4.5.3). KTX2-F.A-MAN.0001.docx Page 49 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 50: Figure 39: Altitude Offset Calibration Menu

    (“---“). KTX2-F.A-MAN.0001.docx Page 50 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 51: Figure 40: Test Mode Menu

    The submenu “Device Info” displays the checksum of the software and the serial number of the device. KTX2-F.A-MAN.0001.docx Page 51 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 52: Figure 41: Device Info Menu

    Figure 41: Device Info Menu KTX2-F.A-MAN.0001.docx Page 52 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 53: Errors, Warnings And Notifications

    Only the last failure is shown except for the battery voltage warning. KTX2-F.A-MAN.0001.docx Page 53 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 54: Low Battery Voltage

    The transponder is designed to operate above 9 V DC. Do not operate the unit below 9 volts. KTX2-F.A-MAN.0001.docx Page 54 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 55: Very Low Battery Voltage

    2. Check electric generator. KTX2-F.A-MAN.0001.docx Page 55 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 56: Limiting Failures

    But if the error reoccurs the transponder must be switched off. KTX2-F.A-MAN.0001.docx Page 56 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 57: Table 7: Severe Failures

    Table 7: Severe Failures KTX2-F.A-MAN.0001.docx Page 57 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 58: Notifications

    Switch the transponder off and on again KTX2-F.A-MAN.0001.docx Page 58 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 59: Installation

    “GND“ in case there is weight on wheels, or remains open during flight, see chapter 5.2.2. KTX2-F.A-MAN.0001.docx Page 59 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 60: Static Air Port

    The L-Band antenna used with the KTX2 must fulfil to the following specifications: KTX2-F.A-MAN.0001.docx Page 60 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 61: Table 8: L-Band Antennas

    Characteristic impedance of 50 Ohms. • KTX2-F.A-MAN.0001.docx Page 61 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 62: Table 9: Common Antenna Cables

    (insertion loss) for the cable being used. KTX2-F.A-MAN.0001.docx Page 62 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.
  • Page 63 An SMA<->TNC adapter is available from TQ. KTX2-F.A-MAN.0001.docx Page 63 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 64: Wiring

    Figure 48: Wiring KTX2-F.A-MAN.0001.docx Page 64 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 65: Drawings

    Figure 49: Dimensions of KTX2-F Standard round format KTX2-F.A-MAN.0001.docx Page 65 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 66: Figure 50: Panel Cut-Out

    Figure 50: Panel Cut-Out KTX2-F.A-MAN.0001.docx Page 66 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 67: Technical Data

    9 V DC to 33V DC KTX2-F.A-MAN.0001.docx Page 67 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 68: Table 10: Technical Data

    Table 10: Technical Data KTX2-F.A-MAN.0001.docx Page 68 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 69: Transmitter - Receiver

    Table 13: General Data KTX2-F.A-MAN.0001.docx Page 69 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 70: Fcc Related Issues

    GmbH may void the FCC authorization to operate this equipment. KTX2-F.A-MAN.0001.docx Page 70 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 71: Maintenance

    Clean the display only with, lint-free cloth and an eyeglass lens cleaner that is specified as safe for anti- reflective coatings. KTX2-F.A-MAN.0001.docx Page 71 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 72: Exclusive Limited Warranty And Limitations On Liability

    Any further liability is excluded. KTX2-F.A-MAN.0001.docx Page 72 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 73: Software License Conformity

    KTX2-F.A-MAN.0001.docx Page 73 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

  • Page 74: Ktx2-F.a-Man.0001.Docx

    Internet: www.tq-avionics.com KTX2-F.A-MAN.0001.docx Page 74 of 74 © TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties requires the prior written consent of TQ-Systems GmbH.

This manual is also suitable for:

Ktx2-s.v2295153

Table of Contents