Qtx BUSKER-10 User Manual

Qtx BUSKER-10 User Manual

Portable pa unit

Advertisement

Quick Links

BUSKER-10
Portable PA Unit
Order ref: BUSKER-10 (178.864UK)
User Manual
VERSION 1.2
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty

Advertisement

Table of Contents
loading

Summary of Contents for Qtx BUSKER-10

  • Page 1 BUSKER-10 Portable PA Unit Order ref: BUSKER-10 (178.864UK) User Manual VERSION 1.2 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
  • Page 2: Package Contents

    Introduction Thank you for choosing a Busker-10 portable PA unit. This versatile portable PA unit is packed with features in a compact, manageable enclosure and is suitable for a wide array of applications ranging from public address for presentations to outdoor karaoke.
  • Page 3 Front Panel VHF microphone indicator VHF MIC volume USB port LED display SD/MMC card slot USB/SD/FM/BT volume Media player Mode select Playback Repeat mode select USB/SD memory device select Previous track (hold seek reverse) Play/Pause Next track (hold seek forward) Rear Panel Line output L+R RCA AUX/Line input volume...
  • Page 4 Powering up Your new Busker-10 portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, turn down all volume controls and switch the unit on (31) and see if the power LED lights (30). If not, you will need to charge the battery before use away from mains power.
  • Page 5: External Inputs

    External Inputs In addition to the Busker-10’s own VHF microphone, two 6.3mm jack inputs (26, 27) are provided to connect external wired or wireless microphones, which are both governed by the WIRED MIC VOLUME control (17). If required, the music level can be automatically muted when speaking into a microphone by switching in the TALKOVER feature on (25) A further 6.3mm jack input is provided for an electric or electro-acoustic guitar (28)
  • Page 6 Once audio is playing through the Busker-10 from B/T wireless, adjust the MEDIA volume control (7) to the required volume. B/T wireless on the Busker-10 can only pair to a single device at any one time and should be operable over a range of 5 to 8 metres.
  • Page 7: Specifications

    Specifications Power supply 230Vac, 50Hz (IEC) or external 12Vdc Battery type 12V 7Ah rechargeable sealed lead-acid Battery life Up to 6 hours Recharge time 8 hours Controls: front panel VHF mic volume(s), Media volume, Media transport controls Controls: rear panel Guitar volume, Echo, Wired mic volume, Bass, Treble, Master Inputs 2 wired mic (jack), instrument (jack), aux (RCA &...
  • Page 8: Troubleshooting

    Troubleshooting Check POWER switch is on Check battery is not drained fully No output and no LEDs lit Check mains lead is connected Check mains or D.C. fuse hasn’t blown Check 9V batteries in wireless transmitters Check wireless transmitter is switched on Power LED lit but no VHF Check that handheld transmitter is not switched to MUTE output...

This manual is also suitable for:

178.864uk

Table of Contents