Mediclinics CP0016H Installation And Safety Instructions
Baby changing station
Hide thumbs
Also See for CP0016H:
- Installation and safety instructions (76 pages) ,
- Installation and safety instructions (76 pages)
Table of Contents
Advertisement
Quick Links
www.mediclinics.com
CAMBIA PAÑALES
BABY CHANGING STATION
TABLE À LANGER
WICKELTISCH
TROCADOR DE FRALDAS
FASCIATOIO
ΕΠΙΤΟΙΧΙΑ ΑΛΛΑΞΙΕΡΑ ΜΩΡΟΥ
سرير تغيير الحفاضات
CP0016H / CP0016HCS
INSTRUCCIONES DE INSTALACIÓN Y DE SEGURIDAD
INSTALLATION AND SAFETY INSTRUCTIONS
INSTRUCTIONS RELATIVES À L'INSTALLATION ET À LA SÉCURITÉ
ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣΤΑΣΗΣ ΚΑΙ ΑΣΦΑΛΕΙΑΣ
MONTAGEANLEITUNG UND SICHERHEITSHINWEISE
ISTRUZIONI DI MONTAGGIO E DI SICUREZZA
РУКОВОДСТВО ПО УСТАНОВКЕ И БЕЗОПАСНОСТИ
إرشادات التثبيت والسالمة
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mediclinics CP0016H
Summary of Contents for Mediclinics CP0016H
- Page 1 TABLE À LANGER WICKELTISCH TROCADOR DE FRALDAS FASCIATOIO ΕΠΙΤΟΙΧΙΑ ΑΛΛΑΞΙΕΡΑ ΜΩΡΟΥ سرير تغيير الحفاضات CP0016H / CP0016HCS INSTRUCCIONES DE INSTALACIÓN Y DE SEGURIDAD INSTALLATION AND SAFETY INSTRUCTIONS INSTRUCTIONS RELATIVES À L'INSTALLATION ET À LA SÉCURITÉ ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣΤΑΣΗΣ ΚΑΙ ΑΣΦΑΛΕΙΑΣ MONTAGEANLEITUNG UND SICHERHEITSHINWEISE ISTRUZIONI DI MONTAGGIO E DI SICUREZZA РУКОВОДСТВО...
-
Page 2: Before You Begin
European and local, that are in force at the time. Mediclinics S.A. is not liable for damages caused by the improper installation, poor maintenance or misuse of this baby changing station. -
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS Required tools You will need the following tools for the installation of the baby changing station: Measuring tape in order to install the changing station to the appropriate height and distance Phillips Head Screwdriver in order to tighten the fasteners of the changing station A level in order for the changing station to be installed completely horizontal to the ground... -
Page 4: Step 1. Material Inspection
Step 1. Material inspection It is very important to carry out a visual inspection of the packaging of the baby changing station in order to ensure that it has not suffered any damage during transport and handling. If damage to the packaging is found, the changing station should be carefully inspected to see if it has suffered any damage. - Page 5 Following the above scheme, using the pencil, mark on the wall the top two holes of the changing station's holding structure. It is very important to make sure that the locations marked with the pencil for the mounting holes are at the same level before drilling the holes. Installation according to ADA regulations.
- Page 6 Due to the problems posed by installations on this type of walls, with regard to fixing, it is recommended that the installation is carried out by technicians specialized in installations on this type of walls. Mediclinics is not responsible for the installation of its changing stations on plasterboard or hollow walls.
- Page 7 Open the liner dispenser with the special key provided. The four holes for mounting the liner dispenser on the holding structure of the changing station will be visible. Fit the dispenser to the holding structure of the changing station and align the mounting holes of the dispenser.
- Page 8 Remember that any additional component or spare part required for the baby changing station should only be purchased from the manufacturer or an authorized distributor. COMPONENT CODE Label RC9691020SMD Shock absorber CP0016H RC9161001SMD Lock + key RC9483003SMD RC99065 Protective liners...
- Page 9 RECOMMENDATIONS FOR PREVENTIVE MAINTENANCE AND CLEANING Proper preventive maintenance and careful cleaning are essential for an appropriate, clean and safe product use. For proper maintenance, follow these steps: Inspect the components of the baby changing station: make sure that there are no cracks, dents or any other sign that would suggest any fault in the product.
- Page 10 For proper cleaning, follow these steps: In order to avoid contact with the detergent, it is recommended to remove the liners from their housing before cleaning. Clean all plastic pieces of the changing station using antibacterial soap. On the CP0016HCS model, avoid contacting the stainless steel front with the antibacterial soap; it has to be cleaned with a standard stainless steel cleaner and a soft cloth.
Need help?
Do you have a question about the CP0016H and is the answer not in the manual?
Questions and answers