Koala Kare Kidsitter KB888 Replacement Instructions

Koala Kidsitter
® ®
Materials Supplied: Three #8-32 3/8" Phillips Pan Head Machine Screws Tools Required: Phillips Head Screwdriver
1. Position the KidSitter
car seat carrier position. Release the strap from the
buckle on the outside of the high chair leg.
2. Locate the plastic clip on the left leg and open it so
that the two screws securing it to the leg are exposed.
Using a Phillips Head Screwdriver remove the two
screws. Discard the old clip and screws.
® so that it is in the infant
®
Strap Replacement Instructions
3. On the right leg, loosen the screw securing the
strap to the chair. Discard the old strap and screw.
4. Take the new clip and position it on the left leg so
that slot in the clip aligns with the two holes on the
left leg. The plastic lever should be at the top of the
clip. Using a Phillips Head Screwdriver, secure the clip
to the leg with two of the screws provided.
Instructions Continued on the Back