Advertisement
Quick Links
Installation And Setup Instructions
TECHNICAL SPECIFICATIONS
Power supply.
Battery life.
Power saving for enhanced battery life.
Battery low indication.
Channels.
Frequency.
Transmission format options.
Factory default.
Estimated transmission range. Line of sight in a radio clutter free
environment.
Number of digits per code.
Maximum number of user codes.
Ingress protection.
Dimensions.
Weight.
Operating temperature.
BUZZER INDICATIONS
Key press confirmation.
Correct input sequence. Passed.
Incorrect input sequence. Failed.
All users cleared.
Programming mode exited.
Anti-hacking "lockout" active.
Battery low.
Transmitting.
Opening The Battery Compartment And Installing The Battery
E-Pad O
Active
2
EPADO2ACTIVE_2021_003
3VDC (1 x CR2450 or CR2430 battery)
+/- 120 000 operations.
Built in daylight sensor. LED lighting will only be active in the dark.
Audible
16
433.92MHz.
ET BLU MIX © and ET BLUE rolling code.
ET BLU MIX © on all channels.
+/- 200m outdoors and +/- 35m indoors.
4 – 10 digits.
100
IP54
85 x 75 x 37mm
265g
-10
C to 50
C.
o
o
Buzzer
1 x 500ms
2 x 500ms
3 x 500ms
9 x 500ms, followed by 1 x 3s
1 x 1s
5 x 500ms on any key press.
10 x 500ms after valid code entry.
Continuous 250ms while # key held.
Foam pad
Battery
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for ET NICE E-Pad O2 Active
- Page 1 EPADO2ACTIVE_2021_003 E-Pad O Active Installation And Setup Instructions TECHNICAL SPECIFICATIONS Power supply. 3VDC (1 x CR2450 or CR2430 battery) Battery life. +/- 120 000 operations. Power saving for enhanced battery life. Built in daylight sensor. LED lighting will only be active in the dark. Battery low indication.
- Page 2 Factory Defaulting And Unpairing The E-PAD O Active From The Receivers 1. Power down by removing the battery. 2. Hold both the * and # channel keys in. 3. While holding in the * and # channel keys, return power by inserting the battery. (Do not release the buttons until after the LED and buzzer routine has finished) • LED and buzzer begins flashing and beeping intermittently to warn the factory default is about to occur.
- Page 4 All goods manufactured by ET Nice (Pty) Ltd carry a 12 month factory warranty from date of invoice. 2. All goods are warranted to be free of faulty components and manufacturing defects. 3. Faulty goods will be repaired or replaced at the sole discretion of ET Nice (Pty) Ltd free of charge. Within the warranty period.
Need help?
Do you have a question about the E-Pad O2 Active and is the answer not in the manual?
Questions and answers
What is the default user code?
The default user code for the ET NICE E-Pad O2 Active is not provided in the given context.
This answer is automatically generated