Do you have a question about the CX32A20ETV and is the answer not in the manual?
Questions and answers
William R Anderson
May 17, 2025
how do i connect my ear buds
1 comments:
Mr. Anderson
May 22, 2025
To connect Connexx CX32A20ETV to Bluetooth earbuds:
1. Press the Source button on the remote or front panel. 2. Use the arrow buttons to select the Bluetooth Source. 3. Press the BT PAIR button on the remote to start pairing. 4. Follow the pairing instructions on your Bluetooth earbuds.
Make sure your earbuds are in pairing mode.
This answer is automatically generated
David Trembley
April 19, 2025
TV flashes, "After removing, please reconnect the USB device." I am attempting to use a SanDisk SSD, 2 TB. The TV appears to recognize a flash drive, but not the SSD. The TV is a model: CX40A24ETVDCS.
1 comments:
Mr. Anderson
May 10, 2025
The Connexx CX40A20ETV TV supports USB devices that follow the USB V2.0 standard and provide a 5V / 500mA power supply. A SanDisk SSD 2 TB typically requires more power than 500mA and may also use a different USB version or file system not supported by the TV. Flash drives generally use less power and are more compatible with USB V2.0, so they are recognized by the TV.
This answer is automatically generated
Cindy weiss
January 18, 2025
How do I connect up to the cable at my rv park? Do I need to switch off the antenna?
1 comments:
Mr. Anderson
February 4, 2025
To connect the Connexx CX32A20ETV to the cable at your RV park:
1. Ensure the incoming cable is connected correctly to the RV. 2. Verify that the internal RV coax jump cable is attached to the correct port.
There is no specific instruction to switch off the antenna in the provided context, but ensure the cable connection is properly set up and not obstructed.
This answer is automatically generated
judy hutcherson
May 29, 2025
Can this tv be paired with bedroom tv in rv
Phil
May 3, 2025
How do I add an app ? I tried to download the xfinity stream app and got a message saying it was not compatible with this device
Contents Important Safety Instructions ............... . About Your TV Features .
Page 3
Important Safety Instructions Important safety precautions 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatusnear water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the menufacturer’s instructions. 8.Do not install near any heat souses such as radiators.
Important Safety Instructions 16. Mian plug is used as the disconnect device, It shall remain readily operable and should not be obstructed during intended use. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that is does not require a safety connection to electrical earth.
Page 5
Important Safety Instructions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 6
Précautions de sécurité importantes Précautions de sécurité importantes 1.Lire ces instructions. 2.Gardez ces instructions. 3.Heed tous les avertissements. 4.Suivez toutes les instructions. 5.Do'utilisez pas cet appareil près de l'eau. 6.Clean seulement avec le tissu sec. 7.Do bloquent pas les ouvertures de ventilation. Installer conformément aux instructions du menufacturer. 8.Do'installer à...
Page 7
Précautions de sécurité importantes 16. La prise de prevue b utilisée comme prevue ble de déconnexion, Il doit rester facilement prevue ble et ne doit pas être obstrué pendant l’utilisation prevue. Cet équipement est un appareil électrique de classe II ou double isolant. Il a été conçu de telle manière qu'il n'est pas nécessaire d'avoir une connexion de sécurité...
About Your TV Features Includes Setup Remote Batteries Requires 2, AAA-size batteries (included) Connecting the Stand When placing TV on flat surface, be careful not to push, scratch, or otherwise damage the front of the TV and LCD screen. Using a screwdriver, tighten the screws by hand.
Mounting the TV on a wall If you mount this TV on the wall, follow the instructions exactly as set out by the manufacturer. Incomplete or improper installation may cause injury to you, and/or damage to the LED TV. When you have appropriate wall mount brackets, please install them by using the VESA screws included in TV PE bag.
Orientation Front Panel Power button: Press to Turn ON/OFF the TV. Source button: Press repeatedly to select desired audio and/or video source. Arrow buttons: Press to seek up and down radio stations and TV channels. Also use with Virtual Sound button (6) for function selection. Pair button: In Bluetooth Source, press to connect a Bluetooth compatible audio device.
Orientation Remote Turn ON/OFF the TV . 2. Source: Select desired audio and/or video source. 3. P.MODE: Select a picture mode. 4. S.MODE: Select a sound mode. : Select amount of time before TV turns off automatically. 6. NUMBER Buttons(0-9): Enter numbers or select channels; In FM radio source, press SET and one of the 0-9 numeric numbers to preset radio stations, then press one of the 0-9 buttons to recall desired radio station preset.
Orientation Inputs A V I N OPTICAL FM ANT 500mA SPEAKER OUT ZONE B FRONT HDMI 3 IN: HDMI input. FRONT USB: USB Port for media playback when Media is the TV’s selected source. HDMI 1 IN: HDMI input. HDMI 2(ARC) IN: HDMI(ARC) input.
Main Menu Operation Setup Wizard Connect RF cable to the RF IN connector. Select Language Pres utton to select the language to be used for menus and message. Press button to select Go to next step and press ENTER button to enter the sub-menu. Select Time Press button to select the time zone, daylight saving time and time format you want.
Page 14
Main Menu Operation Setup Wizard Auto Scan Pres utton to select t Press utton to select Go to next step and press ENTER Air: Auto Scan →...
Source Select Press Source button on the remote or front panel, Press button on the remote or button on the front panel to choose the desired source. Zone B Source Menu Use this Menu to select Zone B source – TV All (same as Zone A), Bluetooth® or FM. Press and briefly hold the green B button on the remote control or button on the front panel to access the Zone B Source menu.
Setup Menu Press ENU to enter the main menu Press button to select Setup. Press ENTER or to enter Press ENU again to exit or back to parent menu Press button to select among Menu Languag Transparen SD Timeou lose aptio ver Scan nput Labe ther setting...
Picture Menu Press ENU to enter the main menu Press button to select Picture. Press ENTER or to enter Press ENU again to exit or back to parent menu Press button to select among Picture Mod Brightness ontras olo Tin harpnes olor Temperature Advance...
Sound Menu Press ENU to enter the main menu Press button to select Sound. Press ENTER or to enter Press ENU again to exit or back to parent menu Press button to select amon Surround Sound Press ENTER or to enter Press button to adjust Press...
Time Menu Press ENU to enter the main menu Press button to select Time. Press ENTER or to enter Press ENU again to exit or back to parent menu Press button to select among Sleep Time Time Zon aylight Saving Tim Time Forma Auto Cloc lock.
Lock Menu Press ENU to enter the main menu Press button to select Lock. Press ENTER or to enter Press ENU again to exit or back to parent menu Enter your 4 digital password. Default password is 0000,and if you forget what you set, please call the service center. Press button to select among Change Password ystem Loc...
Channel Menu Press ENU to enter the main menu Press button to select Channel. Press ENTER or to enter Press ENU again to exit or back to parent menu Press button to select among Air Cabl Auto Sca avorite Channel Lis how Hid hannel Numbe hannel Label .
Bluetooth Source. My Device BT PAIR button on the remote to connect to a Bluetooth® compatible audio device. Follow pairing instructions on your device. ote. t panel. INFO button to turn off the screen in Bluetooth Source. CONNEXX-ETV...
FM Radio Press Source button on the remote or front panel, Press button on the remote or button on the front panel to choose the FM Radio Source. TUNE+ and TUNE- buttons on the remote to seek up and down radio stations. Press button on the remote control for fine tuning.
Media Note: Before operating Media menu, plug in USB device. Press Source button on the remote or front panel, main Media menu, then press Enter button to enter.
Page 25
Media Enter Press EXIT Enter EXIT Enter Press EXIT...
Page 26
Media Enter Press Menu Enter Press Enter ENTER Enter Press EXIT Press...
Trouble Shooting Problem Solution/Issue Make sure the power cord is plugged in. TV does not Try another AC outlet. operate Unplug unit for an hour, then plug it back in. Check the volume settings. Normal picture, but Sound muted? Press MUTE button. no sound Try another TV channel.
Customer Support Warranty Limited 1 Year Warranty The Manufacturer warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year for parts and 90 days for labor from the original date of purchase.
Page 30
River Park Inc. 21953 Protecta Drive | Elkhart, IN 46516 http://www.riverparkinc.com U.S.(800) 442-7717 International(574) 522-7781...
Need help?
Do you have a question about the CX32A20ETV and is the answer not in the manual?
Questions and answers
how do i connect my ear buds
To connect Connexx CX32A20ETV to Bluetooth earbuds:
1. Press the Source button on the remote or front panel.
2. Use the arrow buttons to select the Bluetooth Source.
3. Press the BT PAIR button on the remote to start pairing.
4. Follow the pairing instructions on your Bluetooth earbuds.
Make sure your earbuds are in pairing mode.
This answer is automatically generated
TV flashes, "After removing, please reconnect the USB device." I am attempting to use a SanDisk SSD, 2 TB. The TV appears to recognize a flash drive, but not the SSD. The TV is a model: CX40A24ETVDCS.
The Connexx CX40A20ETV TV supports USB devices that follow the USB V2.0 standard and provide a 5V / 500mA power supply. A SanDisk SSD 2 TB typically requires more power than 500mA and may also use a different USB version or file system not supported by the TV. Flash drives generally use less power and are more compatible with USB V2.0, so they are recognized by the TV.
This answer is automatically generated
How do I connect up to the cable at my rv park? Do I need to switch off the antenna?
To connect the Connexx CX32A20ETV to the cable at your RV park:
1. Ensure the incoming cable is connected correctly to the RV.
2. Verify that the internal RV coax jump cable is attached to the correct port.
There is no specific instruction to switch off the antenna in the provided context, but ensure the cable connection is properly set up and not obstructed.
This answer is automatically generated
Can this tv be paired with bedroom tv in rv
How do I add an app ? I tried to download the xfinity stream app and got a message saying it was not compatible with this device
How to play Netflix
Is this model able to mirror my s23+ phone?