Quads - Bosch DVR1A1081 Installation Instructions Manual

EazeoRecorderInstalA.book Page 10 Tuesday, November 23, 2004 3:47 PM
DVR1A1081 | Installation Manual | Chapter 2

2.4.2 Quads

The drawing below shows how to connect a quad
without a VCR output to the DVR.
• Connect the monitor to the BNC socket marked
Monitor Out on the rear of the DVR.
Quad
Power switch
Power
AC 100-240
100-240 Vac
Bosch Security Systems | 2004-11
Video OUT
Mux main Video
Monitor In
In
Off
Monitor Out Out 1
Monitor
• Connect the video output of the multiplexer to the
BNC socket marked Video In on the rear of the
DVR.
• In the system menu set the multiplexer item to Off.
To connect a quad with a VCR output, refer to the
multiplexer connections.
1 2 3 4
IR remote
RS-232 control eye
connector connector
RS 232 Remote Control
Looping out
Out 2
GND VEXT
EN | 10