JOCCA 1473 Instruction Manual page 7

English EN
handle it with bare hands.
-The battery must be removed from the device
before disposal.
-The device must be disconnected from the
power for battery removal.
-The battery must be safely removed for
disposal.
INSTRUCTIONS FOR USE
-Before using it, make sure the hair clipper is in perfect use
conditions.
-Connect the charger to the mains electricity supply and the
other end in the set, and then plug in the charging cable in
the main unit; the led will go on indicating that it is charging.
-Make sure that the main unit is in the speed position in 0
when charging.
-We recommend charging the machine for 8 hours before
using it for the first time.
-If you detect a loss of power in the machine, this indicates that
the battery is running out, please recharge it.
-To work more comfortably and to avoid a contact of the hair
rests with clothes, put a towel or a cape on the shoulders of a
person you wish to cut the hair.
-Comb the hair to proceed to cutting. Then choose a cutting
head you want to use, fitting first a front part and following
pressing a back part till a sound of click that notifies of a
proper placing.
-This case consists of 4 heads for different cutting: 4-6 mm,
7-9 mm, 10-12 mm and 13-15 mm.
-Once you have chosen and placed a head you want to use,
slip a switch to a position On (switch on), a device will start
to operate. Then slide a device over the hair. When you have
finished cutting the hair, place a switch to a position Off (switch
off)..
7