Advertisement
Quick Links
How to setup the IPCAM Secure 300R
Before accessing the IP camera, make sure that camera's RJ-45 network cable and IP camera's
power cable are properly installed. For setup IP address, please consult your network
administrator for available IP addresses. The default IP address of IPCAM 300R is 192.168.62.1.
And, please choose the suitable case for you by clicking the
Case
1: IPCAM Secure 300R is connected to ADSL or Cable modem with static IP (without
hub/router or IP sharing device)
Case
2: IPCAM Secure 300R is connected to router or IP sharing device which is connected to
ADSL/Cable modem.
Case 1
Case 1
or
Case
2.
Step 1:
To configure IPCAM 300R,
you need to change some
network setting of your
system. And, to make sure
that you can connect to
internet without problem
after configuring IPCAM
300R, please make sure that
you will record all network
setting before changing.
Then, you can reverse the
setting later.
Now, let's start. Please open
your network connection.
Click on "Property" button.
Step 2:
Please click on "Internet
Protocol (TCP/IP) and then
click on "Property" button.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ipcam Secure 300R
Summary of Contents for Ipcam Secure 300R
- Page 1 1: IPCAM Secure 300R is connected to ADSL or Cable modem with static IP (without hub/router or IP sharing device) Case 2: IPCAM Secure 300R is connected to router or IP sharing device which is connected to ADSL/Cable modem. Case 1...
- Page 2 Step 3: Because the default IP address of IPCAM 300R is 192.168.62.1, please assign one IP 192.168.62.x (for example, 192.168.62.8) in the IP Address. Then, type “255.255.255.0” for the “Subnet Mask”. Then, please click on “OK” button to confirm the change.
- Page 3 Step 6: Click on “LAN Setting” button. Step 7: Please make sure that you disable the Proxy Server. Step 8: Type “192.168.62.1” in the address box.
- Page 4 Step 9: Then, you should get the dialogue box. Please type below information to enter into the setting page of IPCAM 300R. User Name: admin Password: 1234 Step 10: Here you can get the setting page of IPCAM 300R. Please click on “System Setup”...
- Page 5 Username & Password, please follow Step 1~7 to reverse your network setting otherwise you can’t connect to internet and link to IPCAM 300R. After you reverse the network setting, please type Username & Password. Then, please click on “OK” button.
- Page 6 Step 15: After entering into the setting page of IPCAM 300R, please check if you can see the image or not. Step 16: If you can’t get image, the problem may be the security setting of your browser. If so, please click on Tool/Option.
- Page 7 Step 18: Click on “Custom” button to change the security setting. Step 19: Enable the ActiveX or Java in the setting box and confirm the change. Step 20: Then, refresh the website and check if you can see the image or not. Note: If you are afraid the internet security and don’t want to change the setting, you may think...
- Page 8 IP address to the list of “trust website” (please refer to the step 18). Case 2: If you connected one or many pc and IPCAM 300R to one Router/IP Sharing machine and share the same ADSL/Cable line, please follow below instruction to configure your IPCAM 300R.
- Page 9 1234 Then, please click on “OK” button. Step 4: After entering into the setting page of IPCAM 300R, please check if you can see the image or not. Step 5: If you can’t get image, the problem may be the security setting of your browser.
- Page 10 Step 6: Click on “Security” tag. Step 7: Click on “Custom” button to change the security setting. Step 8: Enable the ActiveX or Java in the setting box and confirm the change.
- Page 11 Step 9: Then, refresh the website and check if you can see the image or not. Note: If you are afraid the internet security and don’t want to change the setting, you may think about adding this IP address to the list of “trust website” (please refer to the step 7).
Need help?
Do you have a question about the Secure 300R and is the answer not in the manual?
Questions and answers