Advertisement
Quick Links
Advertisement
Summary of Contents for bp pulse
- Page 1 Welcome to bp pulse home charging Your home charger user guide...
-
Page 2: Charger Installation
• Stow the connector into the docking location on the front of the unit Your bp home pulse charger should be installed as outlined in the Before starting a charge and connecting the tethered cable to your vehicle, installation guide. This can be found online at www.bppulse.co.uk make sure the cable is fully unwound and not twisted. - Page 3 Grip the handle of the charging connector and remove it from your After your bp pulse home charger has been installed and powered-up, vehicles charging socket. Refer to your vehicle owner manual to check...
-
Page 4: Troubleshooting
This means a fault has developed. The unit will need to be reset before or on the front label) and contact our customer care team. it can be used again. Please see ‘Resetting your bp pulse home charger. Please note that the red LED is also used to indicate poor signal strength Specifications for communicating to units during the start-up sequence. - Page 5 With bp pulse, it’s easy to charge when you’re on the road • The bp pulse network has thousands of public charging points across the UK • A variety of access options mean you can...
Need help?
Do you have a question about the pulse and is the answer not in the manual?
Questions and answers
does unit have a seprate RCD
Yes, the BP Pulse charger has an RCD (Residual Current Device) for earth protection, as mentioned in the context.
This answer is automatically generated