The Removable Base And Spacer; The Removable 1913 Mil Std Rail - Primary Arms GEN II Instruction Manual

THE REMOVABLE
BASE AND SPACER
Thread locker is recommended on the base and
accessory rail screws. The 3mm hex base screws may
be removed for use with AR-15 carry handle upper
receivers in conjunction with our Steel Knurled Head
Thumb Screw, part no: 92581A320.
The 5x Prism Scope features a removable spacer in
between the base and the scope body. Use the spacer
for firearms with straight line stocks such as AR-15s.
Removing the spacer brings the scope body lower for use
with firearms with stocks located lower than the receiver,
like AK-47s. The scope body is compatible with full size
ACOG style mounts with or without the spacer installed.
®
THE REMOVABLE
1913 MIL STD RAIL
The top mounted 1913 MIL STD rail (B2) is useful for mounting a reflex sight or other accessories above the prism scope. It
is removable by turning the four T10 torx screws (A1) counterclockwise and removing them. Removing the 1913 rail shaves a
bit of weight and bulk from the scope. To replace the 1913 rail, torque the screws to only 5 inch pounds after applying a small
amount of blue thread locker. Do not overtighten the screws, this is a very small amount of torque!
5