Advertisement
Advertisement
Table of Contents
Related Manuals for SSK SSK-DK100
Summary of Contents for SSK SSK-DK100
- Page 1 SSK-DK100 User Manual...
- Page 2 Please do not use the unit in places where the temperature is too high, too low or humid. Do not dismantle, repair or manufacture without authorization. 2. Packing List： ① DK-100 Docking ② USB3.0 Cable SSK-DK100 User Manual ③ Power Adapter ④ User Manual...
- Page 3 3.Device interfaces and LED introduction Four LED Indicators Green, Red, Yellow and Orange HDD-B HDD-A USB3.0 interface Power button DC 12V interface CLONE...
- Page 4 4. Features/Specifications Supports 2.5-inch SATA I/II/III HDD/SSD and 3.5-inch SATA I/II/III HDD,2.5 inches support up to ４TB, 3.5 inches support up to １ ０TB; • Support USB3.0 high speed transmission; • Easy to install, plug and play, hot swap; • LED progress indicator; •...
- Page 5 always on and the blue light is flashing. • After around 3-5 seconds, Computer detect new hardware. LED Indicator Color Instructions: • When Docking is turned on, the green light is always on; • After hard drive connected, the blue light turns on,the blue light flashes under reading and writing.(Note: if 2 hard drives are inserted, there will be 2 blue LEDs on)
- Page 6 LED Indicator Color Instructions: • When Docking is turned on, green LED is always on • When the clone mode starts, 4 LED lights flash alternately (Green,Red,Yellow,Orange) • Clone progress indicator: 25% completed, green lights on; 50% completed, red lights on; 75% completed, yellow lights on;...
Need help?
Do you have a question about the SSK-DK100 and is the answer not in the manual?
Questions and answers