Intellinet 711937 Assembly Instructions

SE WALL BOX MANUAL ASSEMBIY
SE WALL BOX MANUAL ASSEMBIY
19" FLAT PACK
RACK CABINET
ASSEMBLY
INSTRUCTIONS
【 1 】 Remove from
⑦
1
separate for the preparation of the
Remove the side panels (4) from the side
【 1 】 Remove from
⑦
frame assembly
.
frames (3) and set them aside.
separate for the preparation of the
frame assembly
.
【4】 Install side frames to the grooves of back
4
Use 4 of the included M6 screws (use 6 for
frame by 4pcs of M6*12 screws (6pcs if more than
Install side frames to the grooves of back
【4】
18U) as shown by the arrow in the picture, note 19"
larger units) to attach each of the 2 side
frame by 4pcs of M6*12 screws (6pcs if more than
mounting rails are in the front side.
18U) as shown by the arrow in the picture, note 19"
frames (3) to the back frame (6).
mounting rails are in the front side.
7
Install the 2 side panels (4).
【7】Install side panels, refer to the
picture
【7】Install side panels, refer to the
picture
© IC Intracom. All rights reserved. Intellinet is a trademark of IC Intracom, registered in the U.S. and other countries. For specifications, go to intellinet-network.com. For warranty information, go to intellinet-network.com/warranty.
Wallmount Cabinet instructions ICG.indd 1
【2】 Open the front door by key, pull the door
, put them
② latch downward, refer to the picture, remove
【2】 Open the front door by key, pull the door
2
Use the included key to pull open the
the front door from front frame, put them
, put them
② latch downward, refer to the picture, remove
separate for the preparation of the frame
door (1) and remove it from the front
the front door from front frame, put them
assembly.
frame (2) by pushing down on the latch.
separate for the preparation of the frame
assembly.
【5】Install top and bottom as shown by
the arrow in the picture.
5
Slide the top (5) and the bottom (8) into
【5】Install top and bottom as shown by
Tip： Please note the direction when install
the arrow in the picture.
place.
bottom, screws will be in the front side,
Tip： Please note the direction when install
please refer to picture.
bottom, screws will be in the front side,
please refer to picture.
SE WALL BOX MANUAL
Packing list
①---Front door---1pc
Packing list
②--- Front frame---1pc
①---Front door---1pc
③--- Side frame---2pcs
②--- Front frame---1pc
④--- Side panel---2pcs
③--- Side frame---2pcs
⑤-- Top---1pc
④--- Side panel---2pcs
⑥--- Back frame---1pc
⑤-- Top---1pc
⑦---19"mounting rails ---2pcs
⑥--- Back frame---1pc
⑧-- Bottom---1pc
⑦---19"mounting rails ---2pcs
⑨--- Package of accessories
⑧-- Bottom---1pc
⑨--- Package of accessories
【 1 】 Remove from
⑦
separate for the preparation of the
frame assembly
.
Attention:
screws be
in the front side
Attention:
Note: screws
screws be
to the front
in the front side
【4】 Install side frames to the grooves of back
frame by 4pcs of M6*12 screws (6pcs if more than
18U) as shown by the arrow in the picture, note 19"
mounting rails are in the front side.
【7】Install side panels, refer to the
picture
Item list of accessories package
M5X10 self-tapping screws---
Item list of accessories package
10pcs
M5X10 self-tapping screws---
M6X12 screws ---
10pcs
21U& More than12U,12pcs
M6X12 screws ---
less than21U, 8pcs
1 Front door
21U& More than12U,12pcs
M6X12 screws&square nuts---
less than21U, 8pcs 2 Front frame
12U& less than12U,10SET
M6X12 screws&square nuts---
3 Side frame x2
More than12U, 20SET
12U& less than12U,10SET
Tip：Check the quantities of the items 4 Side panel x2
More than12U, 20SET
after open package, ensure
5 Top
Tip：Check the quantities of the items
quantities is right to improve the
after open package, 6 Back frame ensure
assembly efficiency.
quantities is right to improve the
7 Mounting rail x2
ATTENTION:
assembly efficiency.
8 Bottom
please remove front/back door and
ATTENTION:
side plane from the frame prior to
please remove front/back door and
unpacking
side plane from the frame prior to
unpacking
【3】 Fix 19" mounting rails to the first holes of
top & bottom of side frames by 4sets of M5
【3】 Fix 19" mounting rails to the first holes of
3 screws.
Use the 4 included M5 screws to attach a
top & bottom of side frames by 4sets of M5
mounting rail (7) to each side frame (3).
screws.
【2】 Open the front door by key, pu
, put them
② latch downward, refer to the pictur
the front door from front frame,
separate for the preparation of t
assembly.
【6】 Install front frame by 4pcs of
6
Use 4 of the included M6 screws (use 6 for
M6*12 screws (6pcs of M6*12 screws if
【6】 Install front frame by 4pcs of
larger units) to attach the front frame (2)
more than 18U), refer to the picture.
M6*12 screws (6pcs of M6*12 screws if
to the assembly.
more than 18U), refer to the picture.
8
Reverse Step 2 by inserting the lower
【5】Install top and bottom as
door latch into the frame and then
the arrow in the picture.
【 8 】 Repetition step 2, install
pushing down on the upper door latch
Tip： Please note the direction w
front door.
【 8 】 Repetition step 2, install
to install the front door (1). Note: Once
Tip: SE enclosure is the bolted bottom, screws will be in the f
front door.
structure, need to adjust the
please refer to picture.
the unit is assembled, check that all
Tip: SE enclosure is the bolted
diagonal size of enclosure after
corners are square to ensure that the
structure, need to adjust the
the assembly,
diagonal size of enclosure after
door opens and closes properly.
homogeneous space for
the assembly,
doors and doors work well.
homogeneous space for
doors and doors work well.
North & South America Asia & Africa
IC Intracom Americas IC Intracom Asia
550 Commerce Blvd. 4-F, No. 77, Sec. 1, Xintai 5th Rd.
Oldsmar, FL 34677 Xizhi Dist., New Taipei City 221
USA Taiwan
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- Top---1pc
⑥--- Back frame---1pc
⑦---19"mounting rails
the
⑧-- Bottom---1pc
the
⑨--- Package of acces
Attenti
screws
in the
ensure
all
ensure
all
Europe
IC Intracom Europe
Löhbacher Str. 7
D-58553 Halver
Germany
7/30/14 2:22 PM