ARIAWiFi CONTENT Scope of delivery ....................................6 Technical specifications..................................6 Assembly and preparation for operation ..........................9 Mains connection ....................................11 Operating rules ..................................11 Fan control ..................................12 Transport regulations ..........
Page 3
ARIAWiFi These operating instructions are the most important document for operation and are aimed at specialist and maintenance staff as well as operating personnel. The operating instructions contain information on the intended use, technical data, functionality and installation of the ARIAWiFi device and all its modifications. Skilled and maintenance personnel should have completed training in ventilation and must carry out the work in accordance with the applicable local occupational safety regulations, building norms and standards.
Page 4
ARIAWiFi MEET THE PRESENT OPERATING REQUIREMENTS, TO ENSURE PROPER FUNCTION AND LONG SERVICE LIFE OF THE FAN. The device must be disconnected from the power supply before all connection, adjustment, maintenance and repair work. Service and maintenance work must only be carried out by qualified personnel who have a valid license for electrical work on electrical systems up to 1000V.
Page 5
ARIAWiFi Please do not sit on the device or leave any objects on it. This device may only be used by children from the age of 8 and persons with limited physical, mental or sensory abilities or without sufficient experience and knowledge if they have been supervised or have been instructed in the safe use of the device and have understood the resulting dangers.
ARIAWiFi SCOPE OF DELIVERY Fan: 1 pc 1 pc Nozzle with a diameter of 100 mm: 1 pc Nozzle with a diameter of 125 mm: Screws and dowels: 4 pc. 1 pc Operating manual: 1 pc Packaging box: TECHNICAL SPECIFICATIONS The product described in the operating instructions is an axial fan made of high quality plastic Ventilation of small to medium-sized living spaces that are heated in winter.
Page 7
ARIAWiFi TECHNICAL SPECIFICATIONS Sound pressure Max. Power current Speed, för Support- performance, model level Ventilation level diameter ouch recording, A min-1 m3 / h acceptance 3m, dBA 0.02 17th 24 hours 0.04 1650 Silent 0.06 2150 ARIAWiFi 0.03 17th 24 hours 0.04 1350 22nd...
Page 8
ARIAWiFi EXTERNAL DIMENSIONS OPERATING MODES OF THE FAN Standby mode: the fan does not run. It is activated when the24 hours mode is activated with an app or by a signal from the temperature / humidity / motion / light sensor or an external switch. 24 hours: the fan runs on a low ventilation level to ensure minimal ventilation around the clock.
ARIAWiFi ASSEMBLY AND PREPARATION FOR OPERATION 1. Protect the fan against the ingress of precipitation and 2. Before installation, make sure that the device is disconnected condensation if it is installed vertically. from the power supply. The installation of the fan with a direct air outlet upwards is not permitted.
Page 10
ARIAWiFi 6. Mount the fan with the help of the screws. 5. Pull the power cable to the ventilation opening, drill the mounting holes and install the wall plugs. 7. Remove the cover to gain access to the terminal box 8.
ARIAWiFi MAINS CONNECTION The fan is designed for connection to a 100-240 V / 50 (60) Hz single-phase AC network. Designations of the terminals on the connection diagram: : Output for connecting the external impedance : phase : Switch for switching the ventilation level : zero : Control chain of the ventilation level OPERATING INSTRUCTIONS...
ARIAWiFi FAN CONTROL The fan is controlled via the app on the mobile device. Use the link or QR code below to download the app. Link to download the apps in App Store Link to download the apps in Play Market After installing the app, connect the mobile device to the fan as a WiFi access point with the name (FAN: + 16 characters of the ID number), as indicated on the control board and the housing of the fan.
Page 13
ARIAWiFi Select the type of connection you want: 1. Call up the menu of the app. 2. Select the menu item Connection - connection list. 3. If the fan is running in wireless access point mode, select the default connection. The connection will be established automatically.
Page 14
ARIAWiFi WIFI SETTING Go to the application menu on your mobile device Menu connection WLAN setting. Then press Receive. The current settings of the WLAN parameters are displayed on the screen. Choose one of the WiFi modesAccess point Client out. Access point: Access point without a home router.
Page 15
ARIAWiFi SPECIAL SETUP MODE «SETUP MODE / RESET» To reset the WiFi password or to connect to the fan, the SetupMode used to edit the settings. To get into the SetupMode to switch, press and hold the button under the cover of the ventilation system for 5 seconds until the LED flashes blue.
Page 16
ARIAWiFi HOME PAGE Show: Overrun switch business Switch-on delay. Moisture value exceeded. Temperature rise Warning indicator (battery needs to be replaced). Operation of the external switch Motion sensor Operating mode Interval ventilation Operating mode Do not bother Switching the valve on / off. Sensor values: Switching the BOOST...
Page 17
ARIAWiFi CLOCK WITH CURRENT TIME DISPLAY To set the current time of the control unit, go to the Settings menu - Current time. The current time is used to indicate the time and operation of some modes on a schedule (see Modes of operation).
Page 18
ARIAWiFi RESET TO WINDOW SETTINGS To reset the device to the factory settings, go to the menu Reset settings. Then press Reset factory settings. After this Resetting the connection with the device can be lost due to the resetting of the Wi-Fi settings. If necessary, set up the WLAN connection again.
Page 19
ARIAWiFi SETTING OF SENSOR CONTROLLED OPERATION When setting the sensors to operate, it should be noted that operation can be selected via the temperature sensor or any other sensor (humidity, motion, light sensor and external switch). Operating setting of the temperature sensor Go to the E menusettings - sensors, set the temperature sensor and activate it.
Page 20
ARIAWiFi Operation setting of the humidity sensor Go to the menu Settings - sensors, deactivate the temperature sensor and select one of the modes of the humidity sensor. There are three modes of operation: Turn off: the humidity sensor is deactivated. Automobile: intelligent humidity control.
Page 21
ARIAWiFi Operation setting of the motion sensor Go to the menu Settings - sensors and activate the motion sensor. If the sensor selection cannot be activated, deactivate the temperature sensor. When the motion sensor is triggered, the switch-on delay is switched on, then the fan switches to the ventilation level Silent.
Page 22
ARIAWiFi OPERATING MODES To set the operating modes, go to the menu Settings operating modes. 24 hours: When the mode is activated, the switched on fan runs at the minimum ventilation level. When the sensors are triggered, the fan switches to the high ventilation level. Silent: Ventilation level for the Silent...
Page 23
ARIAWiFi TIMER SETTING To set the timers, go to the menu Settings timer. Switch-on delay: serves to extend the fan operation in the mode that is activated by triggering the sensors or activating the Boost mode is caused after the limit values of the sensors are no longer exceeded. Time-dependent operation can be ended: •...
ARIAWiFi BATTERY CHANGE When the battery level is low or zero, the corresponding warning indicator is displayed on the app home page (see page 16). When this message appears on the home screen, change the battery. To do this, disconnect the fan from the power supply, remove the cover from the fan and remove the cover that protects the control board.
ARIAWiFi MAINTENANCE INSTRUCTIONS 1. Set the lock button to the position to lock the fan from 2. Remove the front cover. Clean the fan impeller blades operation. The fan operation is blocked. with a soft, dry cloth or brush. Warning! The interlock does not take the voltage from the termination terminals of the fan! 3.
ARIAWiFi MANUFACTURER'S WARRANTY The product complies with European norms and standards, the directives on low voltage and electromagnetic compatibility. We hereby declare that the product complies with the relevant requirements of Directive 2014/30 / EU on electromagnetic compatibility, Low Voltage Directive 2014/35 / EU and Directive 93/68 / EEC on CE marking. This certificate is issued for the above after testing the product.
Page 27
ARIAWiFi The guarantee does not apply in the following cases: • The consumer does not submit the fan completely, as stated in the operating instructions, including the components of the device dismantled by the consumer. • Incompatibility of the model or brand of the device with the information on the packaging and in the operating instructions.
Page 28
ARIAWiFi • Failure of the device as a result of force majeure (fire, flood, earthquake, war, military action of any kind, blockades). • Missing seals if such are provided for in the operating instructions. Failure to • present the operating instructions with the specified date of purchase. •...