Enabling Devices Kaleido-Dome with Shapes User Manual

Kaleido- - - - Dome with Shapes Kaleido Dome with Shapes
Kaleido Kaleido Dome with Shapes Dome with Shapes
Encourages group participation! Encourages group participation!
Encourages group participation! Encourages group participation!
Perfect for encouraging the user to become actively
involved, this fun therapeutic item enhances matching,
grasping and releasing skills. As you fit a shape on the
base, a light is activated. When all twelve shapes are in
place, the large center dome lights up, music plays and
pom poms dance. A great source for continual visual,
auditory and tactile stimulation. Size: 16" Diameter.
Requires 6 C Batteries. Weight: 4¼ lbs.
Operation: Operation:
Operation: Operation:
1. The Kaleido-Dome with Shapes requires six 1.5-volt C
size batteries. Alkaline batteries are recommended
because they last longer. Do not use rechargeable
batteries because they supply lower voltage and the
unit may not perform as well.
2. The battery compartment is located under the Kaleido-
Dome with Shapes. To remove the battery
compartment cover, gently pull on the cover to release
the Velcro strip hold. Install new batteries, being
careful to observe battery polarity.
3. Replace the battery compartment cover. Press down
on the ends of the battery case cover to secure the
Velcro strips.
4. Turn unit on by moving the toggle switch, located on
the back of the unit, to the "ON" position. Turn unit
"OFF" when not in use.
Troubleshooting: Troubleshooting: Troubleshooting: Troubleshooting:
Problem: The music, spinners and lights become slow, Problem:
Problem: Problem:
dim, or distorted, or they do not work at all.
Action: Replace all batteries with new alkaline batteries. Action: Action: Action:
Care of Unit: Care of Unit:
Care of Unit: Care of Unit:
The Kaleido-Dome with Shapes can be wiped clean with
any household multi-purpose cleaner and disinfectant.
Do not submerge Do Do Do not submerge the unit, as it will damage the contents not submerge not submerge
and the electrical components.
Do not use abrasive cleaners, as they will scratch the Do not use abrasive cleaners, Do not use abrasive cleaners, Do not use abrasive cleaners,
surface of the unit.
Rev 2/14/17 Rev 2/ Rev 2/ Rev 2/ 14/17 14/17 14/17