Echanfit CRW4106 User Manual page 11

STEP 7:
Insert the Sensor cable A and B into the Computer bracket (5), and then lock the screw (31)
into the Computer (58).
STEP 8:
1. Take out the Computer up cover (58), and then put the Dry battery (59) into the
Computer up cover (58) as shown in C in the figure;
2. Connect the Sensor cable as shown in the figure A and B, to connect the Sensor cable A
with A and B with B;
3. Insert the Computer bracket (5) into the Main frame (1) and fix it with the Screw (28).
- 10 -